Descripción
Replace the original air-filter housing and inlet tube on a compatible Jeep 3.6L V6 with the K&N 71-1576 Blackhawk Induction air intake kit. The textured-black, powder-coated aluminum tube routes air from a large washable DRYFLOW filter, while a fitted steel heat shield separates the filter from hot engine-bay components. The synthetic filter is oil-free, so routine service does not require filter oil.
Jeep applications
Built for 2018–2023 Jeep Wrangler JL and 2020–2023 Jeep Gladiator models with the 3.6L V6, including applicable eTorque configurations. This part is not designed for vehicles fitted with a body lift. Match the engine and factory sensor connections before choosing the kit.
Features and specifications
- Blackhawk 71 Series intake with a black, reusable non-woven synthetic filter and aluminum intake tube.
- Complete heat-shield assembly, two flexible couplers, five worm-gear hose clamps, filter adapter, edge trim, spacers and installation hardware.
- Replacement air filter: RU-3107HBK; factory inlet-air temperature sensor and crankcase ventilation hose are reused.
- In a controlled 2018 Wrangler 3.6L test, the intake produced an additional 9.1 hp at 5,400 rpm and 10.4 lb-ft at 3,000 rpm; results vary by vehicle.
- Packaged weight: 10.4 lb (4.7 kg). Box dimensions: 24.1 × 15.5 × 14.5 inches.
- Covered by the K&N No-Hassle Lifetime Limited Warranty.
Installation and care
The bolt-on installation normally takes around 90 minutes with hand tools. Carefully transfer the original inlet temperature sensor, keeping its seal as directed, and reconnect the factory ventilation line. Inspect the joints and mounting points after installation. Clean the dry filter approximately every 50,000 miles in normal highway use, or sooner in dusty conditions, with an appropriate synthetic-filter cleaner such as K&N 99-0624. Do not oil the filter.
Emissions fitment: California approval depends on the exact vehicle year and emissions classification. Check the applicable CARB exemption for part 71-1576 before use where emissions approval is required.
Gastos estimados de envío
Visto recientemente
También te puede interesar
Sobre NewRVParts
NewRVParts es una fuente exclusiva en línea de piezas y accesorios nuevos para vehículos recreativos (RV), equipos para autocaravanas, piezas para remolque y arrastre, accesorios para camionetas y productos náuticos. Atendemos a clientes en todo Canadá y Estados Unidos, con productos de fabricantes de confianza enviados a través de una amplia red de distribución norteamericana. Compre en línea repuestos, equipos y accesorios que se entregarán directamente en su puerta.



