Lippert SolidStep 3.0 is a manually folding, ground-supported RV entry staircase. The steps lift into the doorway for travel and have adjustable lower legs for uneven ground. Use the model chart and original assembly illustration to identify the correct two-, three- or four-step version before choosing replacement hardware.

All six listed assemblies have a 400 lb rated capacity. The best replacement depends on two measurements: doorway width, measured between the inner frame edges, and entry height from ground to threshold when the trailer is positioned for normal use.

SolidStep 3.0 model and size chart

The 26-inch and 30-inch designations describe the step size family, not an instruction to measure the outside width of a tread. Measure the actual doorway and entry height before selecting a part number.

Lippert MPN Steps Size family Entry height Door frame width
733931 Double 26-inch 22–28 in 25–28.9 in
733932 Double 30-inch 22–28 in 29–36 in
791572 Triple 26-inch 27–36 in 25–28.9 in
791573 Triple 30-inch 27–36 in 29–36 in
791574 Quad 26-inch 35–44 in 25–28.9 in
791575 Quad 30-inch 35–44 in 29–36 in

Choose 733931 or 733932 for a double step; 791572 or 791573 for a triple; and 791574 or 791575 for a four-step assembly. The narrower and wider doorway versions are different products.

Lippert SolidStep 3.0 assembly illustration

The original manufacturer drawing identifies the upper tread, lower treads, transport lock and plunger bolt. Those are useful places to begin when identifying a damaged latch or other step component.

Official Lippert SolidStep 3.0 assembly illustration labelling the top step, full step, lock assembly and plunger bolt
Lippert SolidStep 3.0 assembly overview. See the manufacturer's illustrated components and manuals.

SolidStep 3.0 step parts and component identification

Lippert's numbered component reference identifies these service items. Match the step's identification tag and the applicable diagram revision before replacing a smaller component.

Component Lippert part # What to check
Low-profile plunger bolt 436574 Transport latch and plunger style
Nylon spacer 328736 1-inch outside diameter and original location
Vinyl latch-flange cap 675819 Shape and position on the transport latch
Latch lever handle cover 645118 Lever profile and fit
18-inch anti-skid strip 438641 For 20⅛-inch tread width
22¼-inch anti-skid strip 345674 For 24⅛-inch tread width

The latch hardware and tread extrusions have changed across production versions. Consult the SolidStep 3.0 component sheets for your particular assembly before selecting individual small parts.

Complete SolidStep 3.0 assemblies at NewRVParts

Each photograph below links to the corresponding MPN listing. Compare the correct width family and number of treads as well as the mounting arrangement.

Lippert SolidStep 3.0 26-inch double-step assembly; NewRVParts product photo of MPN 733931
733931Lippert SolidStep 3.0 26-inch double-step assemblyView product
Lippert SolidStep 3.0 30-inch double-step assembly; NewRVParts product photo of MPN 733932
733932Lippert SolidStep 3.0 30-inch double-step assemblyView product
Lippert SolidStep 3.0 26-inch triple-step assembly; NewRVParts product photo of MPN 791572
791572Lippert SolidStep 3.0 26-inch triple-step assemblyView product
Lippert SolidStep 3.0 30-inch triple-step assembly; NewRVParts product photo of MPN 791573
791573Lippert SolidStep 3.0 30-inch triple-step assemblyView product
Lippert SolidStep 3.0 26-inch quad-step assembly; NewRVParts product photo of MPN 791574
791574Lippert SolidStep 3.0 26-inch quad-step assemblyView product
Lippert SolidStep 3.0 30-inch quad-step assembly; NewRVParts product photo of MPN 791575
791575Lippert SolidStep 3.0 30-inch quad-step assemblyView product

Measuring and installation considerations

Doorway widthMeasure between the inside edges of the RV entry frame. Allow enough room for the transport lock and door to close over the stored steps.
Ground-to-threshold heightMeasure when the trailer is level and positioned at its normal camping or towing height, not while its height is temporarily raised.
Step identificationCheck the tag normally located beneath a tread. That confirms the existing product series and helps distinguish earlier components.
Important: SolidStep folds up inside the RV. Verify door swing, entry-floor support, threshold clearance and surrounding trim before installation. Use the manufacturer's installation instructions and secure the step against unexpected movement while servicing.

Other RV step diagrams

Manufacturer reference: Lippert SolidStep 3.0 drawings and manuals.

Boletín de piezas para vehículos recreativos

¡Suscríbase para futuras promociones!

Sobre NewRVParts

NewRVParts es un proveedor exclusivamente en línea de piezas y accesorios nuevos para vehículos recreativos (RV), equipos para autocaravanas, piezas para remolques y enganches, accesorios para camiones y productos marinos. Atendemos a clientes en todo Canadá y Estados Unidos, con productos de fabricantes de confianza enviados a través de una amplia red de distribución norteamericana. Compre en línea repuestos, equipos y accesorios que se entregan directamente en su puerta.

Comprar piezas de RV