Lippert Solid Step 4.0 is a ground-supported manual RV entry system with folding steps, ratcheting adjustable legs and a doorway stow position. Use the factory identification diagram and model chart to choose between the six complete 26-inch and 30-inch assemblies.

Solid Step 4.0 steps have a 500 lb rated capacity. The two-step versions fold manually without lift assist; the listed triple and quad assemblies include integrated lift-assist hardware. Measure both the ground-to-threshold height and the entry-frame opening before choosing a part number.

Solid Step 4.0 part numbers, heights and door widths

Lippert defines doorway width as the distance measured from flange to flange, rather than the advertised nominal door size. The factory door label sizes appear in the chart below.

Lippert MPN Steps Nominal size Entry height Flange-to-flange width Lift assist
2024056996 Double 26-inch 22–28 in 23.75–27.5 in No
2024056997 Double 30-inch 22–28 in 27.75–34.5 in No
2024056998 Triple 26-inch 27.5–39.5 in 23.75–27.5 in Yes
2024056999 Triple 30-inch 27.5–39.5 in 27.75–34.5 in Yes
2024057000 Quad 26-inch 35.5–46.5 in 23.75–27.5 in Yes
2024057001 Quad 30-inch 35.5–46.5 in 27.75–34.5 in Yes

The 26-inch versions serve factory-labelled 26- to 28-inch doors. The 30-inch versions serve labelled 30- to 34-inch doors, provided the actual flange-to-flange width also falls within the range above.

Solid Step 4.0 factory component identification

The Lippert assembly image identifies the top tread, full tread, transport lock, plunger bolt and latching hardware. Use these component names when examining an existing step, rather than assuming similar-looking parts from SolidStep 3.0 will interchange.

Lippert SolidStep 4.0 factory diagram showing tread identification, transport lock assembly, plunger bolt and latch
Lippert Solid Step 4.0 assembly reference. Open manufacturer component and installation resources.

Lift-assist versus standard double-step assemblies

In the Solid Step 4.0 range, the triple and quad versions use lift-assist hardware to reduce the effort required to lift or lower the steps. The double versions do not use the same assembly. Keep these differences in mind when identifying latches, legs and mounting hardware.

View the manufacturer lift-assist assembly diagram
Lippert SolidStep 4.0 lift assist assembly diagram showing gas-assisted hinge, latch, transport lock and lower leg
Original Lippert lift-assist illustration, for the applicable triple and quad step systems.
Double steps2024056996 and 2024056997. Standard manually folded models with step assembly and installation hardware.
Triple steps2024056998 and 2024056999. Lift-assist assemblies with a six-piece fit support kit.
Quad steps2024057000 and 2024057001. Four-tread lift-assist versions for higher ground-to-threshold measurements.

Solid Step 4.0 product photographs

Each exact Lippert part number below links to a matching NewRVParts product listing. Use the size chart to narrow the choices before comparing the step photographs.

Lippert Solid Step 4.0 26-inch Double-step folding RV entry assembly; NewRVParts product photo of MPN 2024056996
2024056996Lippert Solid Step 4.0 26-inch Double-step folding RV entry assemblyView product
Lippert Solid Step 4.0 30-inch Double-step folding RV entry assembly; NewRVParts product photo of MPN 2024056997
2024056997Lippert Solid Step 4.0 30-inch Double-step folding RV entry assemblyView product
Lippert Solid Step 4.0 26-inch Triple-step folding RV entry assembly; NewRVParts product photo of MPN 2024056998
2024056998Lippert Solid Step 4.0 26-inch Triple-step folding RV entry assemblyView product
Lippert Solid Step 4.0 30-inch Triple-step folding RV entry assembly; NewRVParts product photo of MPN 2024056999
2024056999Lippert Solid Step 4.0 30-inch Triple-step folding RV entry assemblyView product
Lippert Solid Step 4.0 26-inch Quad-step folding RV entry assembly; NewRVParts product photo of MPN 2024057000
2024057000Lippert Solid Step 4.0 26-inch Quad-step folding RV entry assemblyView product
Lippert Solid Step 4.0 30-inch Quad-step folding RV entry assembly; NewRVParts product photo of MPN 2024057001
2024057001Lippert Solid Step 4.0 30-inch Quad-step folding RV entry assemblyView product

Check the doorway before replacing RV steps

Measure the flange-to-flange opening, the step height and the available swing clearance. Doors, entry trim, skirting and wheel-well covers can affect the installation even when the nominal doorway size seems correct.

Installation check: Use the current Lippert Solid Step 4.0 installation manual for the exact assembly. Follow its mounting instructions and confirm that the door closes and the transport lock engages before travel.

Related RV step reference pages

Manufacturer sources: Lippert official Solid Step fit chart and manufacturer drawings and installation manuals.

Boletín de piezas para vehículos recreativos

¡Suscríbase para futuras promociones!

Sobre NewRVParts

NewRVParts es un proveedor exclusivamente en línea de piezas y accesorios nuevos para vehículos recreativos (RV), equipos para autocaravanas, piezas para remolques y enganches, accesorios para camiones y productos marinos. Atendemos a clientes en todo Canadá y Estados Unidos, con productos de fabricantes de confianza enviados a través de una amplia red de distribución norteamericana. Compre en línea repuestos, equipos y accesorios que se entregan directamente en su puerta.

Comprar piezas de RV