Description
Help restore engine-fan and driveline alignment after a body lift with the JKS 8100 Budget Motor Mount Lift. These 1-inch spacer blocks raise the factory front motor mounts on the Jeep chassis while retaining suitable original rubber insulators to limit vibration.
Construction and included components
- Two machined 6061-T6 aluminum motor-mount lift spacers with anodized corrosion protection
- Two bolt extensions, two M10 mounting bolts and the matching washers
- Uses good-condition original-equipment rubber motor-mount bushings; does not replace them
- Raises the front of the engine by approximately 1 inch to improve fan-shroud position and rear driveline angle
Vehicle and engine fitment
- Jeep Wrangler YJ, 1987–1995: factory 2.5L, 4.0L or 4.2L engines
- Jeep Wrangler TJ, 1997–2006: factory 2.4L, 2.5L or 4.0L engines
Important installation requirements
The JKS instructions require this kit to be fitted with or after a body lift, rather than as a stand-alone engine replacement mount. Support the engine safely and install one side at a time. Original rubber bushings must be sound; worn mounts need replacement before the lift spacers are installed. Some engine versions require modification of an original mount stud, so check the full installation guide and available engine clearance.
Manufacturer MPN: JKS8100 (supplier SKU 8100).
Estimer la livraison
Derniers affichages
Vous aimerez peut-être aussi
À propos de NewRVParts
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits marins. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.


