Sea-Dog 201070-1
Small rectangular leaves for flush door or cabinet-edge mounting.
Sea-Dog Marine Door Hinges: Butt, Short-Side & Concealed
Replacing a boat cabinet or hatch-door hinge is easier when you compare the entire hinge, not only its outside dimensions. Sea-Dog makes flush-mortised butt hinges, unequal-leaf hinges for restricted mounting space, and a concealed design for doors where visible hardware is undesirable. The six models below are separate parts with different leaf layouts and screw requirements.
Compare Sea-Dog hinge part numbers
Dimensions are in inches and follow Sea-Dog's A × D drawing references unless otherwise noted. These figures are not a substitute for checking hole positions and door clearance.
| Manufacturer part no. | Hinge style | Drawing dimensions | Installation screws |
|---|---|---|---|
| 201070-1 | Compact mortised butt hinge | 1-1/4 × 1-1/2 in | 4 × #8 flat-head |
| 201080-1 | Rectangular butt hinge | 2 × 3 in | 6 × #8 flat-head |
| 201081-1 | Square butt hinge | 3 × 3 in | 6 × #8 flat-head |
| 201510-1 | Short-side door hinge | 2-1/8 × 1-1/2 in | 5 × #8 flat-head |
| 201530-1 | Door hinge | 2-7/8 × 1-1/2 in | 6 × #8 flat-head |
| 201954-1 | Flush concealed hinge | A 1-7/8; D 1-1/2 in | 5 × #6 flat-head |
Fasteners are separate. The screw counts and sizes above are Sea-Dog's specified installation requirements; flat-head screws are not supplied. Confirm the mounting substrate before selecting screws.
What to check before choosing a replacement
- Door and frame faces: identify whether the original hinge uses equal leaves, an unusually narrow leaf, or a concealed offset.
- Mortise and movement: note whether the leaves sit in recesses and whether the door swings clear of adjacent trim.
- Hole pattern: measure all existing screw centres; matching outer size alone does not establish a drop-in fit.
- Concealed hinge geometry: the 201954-1 has a separate B dimension of 2-3/4 inches. Compare its full shape rather than treating it as a standard rectangular butt hinge.
- Material: these six models use stamped 304 stainless steel. For hatch hinges with removable pins or different mounting geometry, see the separate hatch-hinge guide when available.
Explore matching products
Each card links to the exact Sea-Dog model in the NewRVParts catalog, so you can check product-level information before ordering.
Sea-Dog 201080-1
Equal one-inch leaves; intended for a flush-mortised installation.
Sea-Dog 201081-1
Equal 1-1/2-inch leaves on a larger square footprint.
Sea-Dog 201510-1
Unequal-width leaves help where one mounting face is narrow.
Sea-Dog 201530-1
Equal 1-7/16-inch leaves for a conventional surface layout.
Sea-Dog 201954-1
Concealed mounting; additional B dimension is 2-3/4 inches.
Related marine hardware
Hinges and latches solve different parts of a door or hatch installation. See our Sea-Dog anti-rattle and push-button latch guide for locking and retaining hardware, or explore Bimini top caps and inserts for marine frame fittings.
Sobre NewRVParts
NewRVParts es un proveedor exclusivamente en línea de piezas y accesorios nuevos para vehículos recreativos (RV), equipos para autocaravanas, piezas para remolques y enganches, accesorios para camiones y productos marinos. Atendemos a clientes en todo Canadá y Estados Unidos, con productos de fabricantes de confianza enviados a través de una amplia red de distribución norteamericana. Compre en línea repuestos, equipos y accesorios que se entregan directamente en su puerta.
Comprar piezas de RV