Go Power Rigid Solar Panel Z-Bracket Mounting & Roof Parts

Go Power GP-MH-4-KB / 77579 mounts a rigid framed solar panel using four anodized aluminum Z-brackets. This reference shows where the brackets, roof fasteners and cable-entry plate fit into a rooftop system, with links to the exact hardware and rigid solar kits we carry.

How a framed solar panel is supported

Rigid panels sit above the roof on bracket feet, leaving space beneath the framed module for air movement. Fasteners must anchor to a suitable roof structure or approved backing, with membrane-compatible sealing around penetrations.

1. Rigid panel frameCheck the frame's approved attachment points
2. Z-bracket / 77579Four anodized aluminum brackets hold one panel above the roof
3. Roof fastenerRoof-specific anchoring, backing and attachment method
4. Roof membrane and sealProtect penetrations with an approved sealant system
Original component-sequence illustration, not a drilling template, load calculation or manufacturer fastener-placement drawing.

The Go Power bracket set is intended for a flat-mounted framed panel, rather than a tilting assembly. Match the existing panel's frame, hole positions, roof construction and wind-loading requirements.

Mounting hardware versus complete kits

Exact product What it is How to use the reference
GP-MH-4-KB / 77579 Four Z-brackets for one rigid framed panel Mounting bracket hardware; select roof attachments separately
OVERLANDER 200W One 200W framed module in a complete solar kit Includes controller; verify the hardware and controller revision
OVERLANDER-E 200W One additional 200W framed solar module Expansion wiring and hardware; no charge controller
GP-CEP / 74671 Separate two-cable roof entry plate Rooftop cable routing; not a panel mounting bracket
Dicor 501LSB1 Black self-leveling lap sealant Seals compatible horizontal roof penetrations, not a structural mounting adhesive

One GP-MH-4-KB set provides four brackets for one appropriate rigid panel. Go Power lists panel-side hardware with the bracket set; roof fasteners and sealant must be chosen for the actual mounting surface. The Overlander expansion kit adds a panel without a separate charge controller.

Sealing is separate from fastening. Dicor 501LSB1 is a self-leveling lap sealant for suitable horizontal roof surfaces, seams and fastener heads. It is not a replacement for structural fasteners or an adhesive for bonding a solar module to the roof. Confirm roof-membrane compatibility before use.

Find the rigid-panel hardware and parts

Framed solar mounting kit

Related framed solar panel kits

Rooftop cable and sealing components

Original manufacturer mounting references

Consult Go Power's bracket and Overlander installation references for the panel-frame mounting positions and supplied accessories. The Dicor manufacturer reference explains the intended use of its self-leveling lap sealants; the RV roof manufacturer determines appropriate substrates, fasteners and sealing preparation.

Go Power GP-MH-4-KB mounting hardware · Overlander rigid solar kit reference · Dicor roof lap sealant details

Before installation: Locate structural backing, hidden wiring and plumbing, then follow roof and module installation requirements. Solar panels produce voltage in light; cover or isolate the array and have a qualified installer verify mechanical loading and electrical protection.

Boletín de piezas para vehículos recreativos

¡Suscríbase para futuras promociones!

Sobre NewRVParts

NewRVParts es un proveedor exclusivamente en línea de piezas y accesorios nuevos para vehículos recreativos (RV), equipos para autocaravanas, piezas para remolques y enganches, accesorios para camiones y productos marinos. Atendemos a clientes en todo Canadá y Estados Unidos, con productos de fabricantes de confianza enviados a través de una amplia red de distribución norteamericana. Compre en línea repuestos, equipos y accesorios que se entregan directamente en su puerta.

Comprar piezas de RV