Trailer coupler locks can secure different things. Some block a hitch ball from entering an unhitched trailer coupler; another design can retain a coupler's latch after it is properly connected for towing. CURT's 23082 tri-ball, 23090 ratcheting, 23091 heavy-duty and 23092 paired-lock kit are different solutions. Start with when you want to use the lock, then check your coupler's exact shape.
What are you trying to secure?
A trailer parked without the tow vehicle
23090 uses a ratcheting U-bar to block the coupler. 23091 provides a heavier-duty lock body with ten ratchet positions. Both are removed before coupling.
A trailer parked or correctly hitched
23082 uses a tri-ball insert to secure an unhitched trailer and a locking lasso pin that can retain a compatible coupler latch during towing. Remove the ball insert before hitching up.
The trailer coupler and receiver ball mount
23092 pairs a parked-trailer 23090 coupler lock with a separate 5/8-inch receiver hitch lock, keyed alike. 23090-KA offers keyed-alike organization for compatible standalone coupler locks.
Coupler-blocking lock versus a latch-retaining lock
The coupler is deliberately blocked so a trailer ball cannot be inserted. Remove the entire coupler-blocking lock before attaching the trailer to a vehicle.
Correctly hitched for travelSeat ball → close latch → use approved retaining pin
A latch pin or lock is only a secondary latch retainer. CURT 23082 has a special locking lasso that supports this use with its tri-ball insert removed.
Fit still needs checking: The three standard ball sizes—1-7/8, 2 and 2-5/16 inches—describe the lock's designed coupler range, not a guarantee it fits every unusual trailer tongue or latch shape. CURT lists a 3-7/8-inch inside U-bar width for its 23090/23091-style coupler-blocking locks and a 1–3-inch latch-pin adjustment range for 23082.
CURT 23090 coupler lock plus CURT 23528 receiver lock
Choosing keyed-alike or separate locks
23090 is the standard ratcheting coupler-blocking lock. 23090-KA is the keyed-alike variant for customers organizing multiple locks with matching keys. Confirm available key-matching options when ordering rather than assuming locks purchased separately are automatically keyed the same.
23092 is a set with two different locks: the CURT 23090 coupler lock and CURT 23528 receiver lock. CURT specifies the receiver lock for compatible 2-inch and 2-1/2-inch receiver tubes using a 5/8-inch pin. Check the receiver and ball-mount pin hole rather than assuming the coupler size determines the receiver-lock fit.
Four checks before purchase
Record your ball-coupler size. These locks are for compatible conventional ball couplers; don't assume suitability for pintle, fifth-wheel or gooseneck hitches.
Measure the available tongue width and latch span. Compare the lock's U-bar clearance or pin adjustment range with the actual coupler.
Decide where the lock will be used. Coupler-blocking devices are for the parked, unhitched trailer; only an expressly designed latch-retaining device may remain on a correctly coupled trailer.
Confirm key and kit requirements. An individual coupler lock is not a two-piece hitch security set, and separately ordered keys are not necessarily identical.
Parked or coupled trailer. Fits standard 1-7/8, 2 and 2-5/16-inch ball couplers with suitable latching geometry; 1/4-inch pin adjusts to a 1–3-inch latch span.
CURT permits use of the locking lasso to retain the latch while towing, after the tri-ball insert has been removed.
Trailer parked or towing: separate locks. Coupler portion fits the three common ball sizes; receiver lock has a 5/8-inch pin for compatible 2- and 2-1/2-inch receiver tubes.
The receiver pin can remain installed as appropriate during towing, but the orange coupler-blocking lock is only used while uncoupled.
No. It blocks access to the ball socket of an unhitched trailer. Remove the coupler-blocking lock before attaching the trailer to the tow vehicle.
How does the CURT 23082 differ?
Its removable tri-ball insert blocks an uncoupled trailer, while the linked locking lasso can secure the closed latch of a correctly coupled trailer. Follow CURT's instructions for each use.
Is 23091 simply a different colour of 23090?
No. CURT specifies a heavy-duty steel lock bar, aluminum body and ten-position ratchet on 23091. Both use a 3-7/8-inch inside U-bar width.
Does 23092 include two coupler locks?
No. CURT lists one 23090 coupler lock and one 23528 receiver hitch lock in a keyed-alike set.
For further manufacturer guidance on coupler and receiver security selection, refer to CURT's lock selection and sizing guide. Locks deter theft but do not replace safe trailer hitching procedures.
NewRVParts es un proveedor exclusivamente en línea de piezas y accesorios nuevos para vehículos recreativos (RV), equipos para autocaravanas, piezas para remolques y enganches, accesorios para camiones y productos marinos. Atendemos a clientes en todo Canadá y Estados Unidos, con productos de fabricantes de confianza enviados a través de una amplia red de distribución norteamericana. Compre en línea repuestos, equipos y accesorios que se entregan directamente en su puerta.