Choose an Attwood marine fishing-rod holder by how you intend to mount it and where the rod should point. The standard polished stainless flush-mount range offers fixed 30°, 15° and straight tubes. If you need a rod cradle that can be repositioned on a top or side surface, the 5010-4 Pro Series uses a different mounting design.
Fixed-angle stainless tubes versus an adjustable rod cradle
All three standard holders use a 2-inch-diameter, 7½-inch-long open-end tube and an oval flush flange. Choose the angle before cutting the deck.
For spinning or baitcasting rods, the black 5010-4 includes a combination mount and a deep-tooth gear lock for controlled rod positioning.
Attwood fishing-rod holder model comparison
The three standard models have polished 316 stainless tubes and oval flanges, protective polymer liners and UV-resistant cap/gaskets. The Pro Series is a different product family and is not sized as a 2-inch through-deck stainless tube.
| MPN | Construction | Rod position | Tube diameter | Cap / gasket | Mounting style |
|---|---|---|---|---|---|
| 66362-7 | Stainless flush mount | 30° angled | 2 in | Black cap gasket | Oval flange; fixed through-deck |
| 66363W7 | Stainless flush mount | 15° angled | 2 in | White cap gasket | Oval flange; fixed through-deck |
| 66364-7 | Stainless flush mount | 0° / straight | 2 in | Black cap gasket | Oval flange; fixed through-deck |
| 5010-4 | Pro Series adjustable | Adjustable; gear lock | Not published as 2-in flush tube | No flush-mount cap specified | Combination top or side mount |
For the three stainless models, published tube length is 7½ inches. The -7 / W7 retail variants include cap/gaskets; replacement gasket MPNs and exact mounting clearances should be checked against the original holder.
Deck clearance, support and drainage checks
Check the thickness and structural backing of the mounting surface, the rod angle relative to the gunwale, and the clearance for the 7½-inch tube below the deck. Open-end flush holders require suitable drainage arrangements; a cap gasket does not eliminate that need.
The 5010-4 is a top/side-mount Pro Series holder, not a flush-mount stainless sleeve. Conversely, the stainless 66362, 66363 and 66364 families use fixed 30°, 15° and 0° tube configurations. Choose the complete mounting design appropriate to the boat.
Match the rod and reel dimensions and intended use to the holder. Follow the boat builder's drilling, bedding and load requirements before installation.
Attwood stainless and adjustable rod holder options
Choose the correct model below for product details and warehouse availability.
Attwood 66362-7
Polished stainless, open-end tube with a black protective cap/gasket. The 30° tube angle is not the same as the 15° model.
View product details and availability
Attwood 66363W7
Fifteen-degree open-end stainless holder supplied with a white UV-resistant cap/gasket; W identifies the white-gasket version.
View product details and availability
Attwood 66364-7
Straight open-end stainless rod tube with black cap/gasket. Confirm below-deck clearance for the vertical orientation.
View product details and availability
Attwood 5010-4
Black Pro Series rod cradle for baitcasting or spinning reels with a deep-tooth gear lock and combination mounting base.
View product details and availabilityOther marine hardware references
NewRVParts products ship from supplier warehouses; customer viewing and pickup are unavailable.