The PD9300 series consists of standalone 12V converter/chargers offered in 30-, 45-, 60- and 80-amp versions. Each has selectable charging profiles for compatible flooded lead-acid, AGM and lithium batteries, as well as a constant-voltage mode. Choose the unit by the RV's electrical design, mounting space, battery bank and available AC circuit.
Compare the matching products
Choose a product photograph to open its individual NewRVParts listing. Manufacturers use separate model numbers for different current ratings, charging methods and accessories.
PD9330V — Progressive Dynamics PD9300 30A Converter Charger30A deck-mount converter; 15A AC cord
PD9345V — Progressive Dynamics PD9300 45A Converter Charger45A deck-mount converter; 15A AC cord
PD9360V — Progressive Dynamics PD9300 60A Converter Charger60A deck-mount converter; 15A AC cord
PD9380V — Progressive Dynamics PD9300 80A Converter Charger80A deck-mount converter; requires 20A AC receptacle
PD92201V — Progressive Dynamics Charge Wizard Remote PendantCharge-stage indicator and manual mode command
Identify the correct model
| Converter model | Rated DC output | AC input and plug | Approximate case size (H × L × W) |
|---|---|---|---|
| PD9330V | 30A, 500W input | 105–130V AC, 15A plug | 4.5 × 8.25 × 7.25 in |
| PD9345V | 45A, 725W input | 105–130V AC, 15A plug | 4.5 × 8.25 × 7.25 in |
| PD9360V | 60A, 1000W input | 105–130V AC, 15A plug | 3.6 × 8 × 9 in |
| PD9380V | 80A, 1300W input | 105–130V AC, 20A plug | 3.6 × 8 × 9 in |
Locate the electrical and charging components
The model-specific information below helps identify a terminal, installation component or separately listed accessory. It does not replace the manufacturer's electrical installation instructions.
| Component | Function | Factory identification |
|---|---|---|
| AC power cord | Supplies the converter from shore/generator AC distribution | PD9380 requires a 20-amp receptacle; the three smaller models use 15-amp plugs |
| Positive and negative DC terminals | Connect to the RV's battery/12V distribution system | PD9360 and PD9380 provide dual positive and negative lugs |
| Reverse-battery fuses | Protect against reversed battery connection | Disconnect all power before inspecting or replacing with the same fuse ratings |
| Chassis-ground lug | Bonds the converter to the metal RV chassis | Use the ground conductor sizing specified in the PD9300 manual |
| Battery selection button and LED | Selects flooded lead-acid, AGM, LiFePO4 or fixed 13.6V output | LED colours: green, white, blue or magenta |
| Accessory port for Charge Wizard pendant | Provides status and manual stage functions | PD92201V is the separately listed remote pendant |
| Cooling fan and heat sink | Manage internal operating temperature | Maintain the required dry, ventilated mounting location |
| Battery positive protection | A properly sized fuse or breaker protects the battery cable | Use the factory cable-sizing chart and applicable electrical requirements |
Original manufacturer installation reference
Refer to the factory document for terminal locations, wiring precautions, part identification and the correct connection procedure.
Use the original manufacturer's PDF to enlarge diagrams and read the complete instructions.