Torklift D3113 Frame Mounted Camper Tie Downs, Fits 2019, 2023 Ram 2500

The TorkLift D3113 is a rear frame-mounted tie-down pair designed for compatible Ram 2500 trucks, supplying removable camper anchor points without permanently exposed tie-down arms.

Manufacturer-Matched Fitment

• Exact MPN: D3113, standard steel rear tie-down pair. The lighter stainless-steel/aluminum D3113A Talon model is a separate product.
• Manufacturer-listed range: selected 2019–2027 Ram 2500 trucks with either 6.5- or 8-foot beds, depending on cab, running-board and other configuration details.
• Cab types: Regular, Crew and Mega Cab applications appear in the manufacturer's product range, but not every cab/bed combination is supported in every year.
• Important legacy installation exclusions: the original 2019–2023 fitment notes below specify restrictions for rear bumper kick-out steps and factory under-bed flip-out steps, and distinguish factory-hitch requirements. Keep these restrictions unless the exact vehicle's instructions establish otherwise.
• Later years: 2024–2027 are included in the manufacturer's broad product range; check the individual truck in the manufacturer's application data before treating a particular fit as confirmed.

Previously Listed Detailed Vehicle References

The original 2019–2023 cab/bed details and hitch and step exclusions are preserved below. Confirm the exact rear hitch and underbody step design before purchase. The original catalog entries below are preserved, but exact year, cab, bed, installed hitch and equipment must agree with TorkLift's current Fit Finder.

• Ram 2500 (2019–2023):
• 2019 Models:
• Mega Cab (Long Crew) – 6.5 ft bed (76.3 in) – 4x2 & 4x4 – Gas & Diesel
• Crew Cab – 6.5 ft bed (76.3 in) – 4x2 & 4x4 – Gas & Diesel
• Crew Cab – 8 ft bed (98.3 in) – 4x2 & 4x4 – Gas & Diesel
• Regular (Standard) Cab – 8 ft bed (98.3 in) – 4x2 & 4x4 – Gas & Diesel
• 2020–2023 Models:
• Mega Cab (Long Crew) – 6.5 ft bed (76.3 in) – 4x2 & 4x4 – Gas & Diesel
• Crew Cab – 6.5 ft bed (76.3 in) – 4x2 & 4x4 – Gas & Diesel
• Crew Cab – 8 ft bed (98.3 in) – 4x2 & 4x4 – Gas & Diesel
• Regular (Standard) Cab – 8 ft bed (98.3 in) – 4x2 & 4x4 – Gas & Diesel
• Fitment Notes
• Requires factory-installed hitch
• Compatible with gas and diesel engines
• Fits 2WD and 4WD trucks
• Will not fit trucks equipped with rear-mounted kick-out steps under the bumper (2019 models)
• Will not fit trucks equipped with factory under-bed flip-out steps (2020–2023 models)
• Some configurations also fit trucks without a hitch receiver (verify before purchase)
• Vehicle-specific design ensures proper alignment and load stability

Package and Installation

• Package quantity: two rear frame-mount brackets/receivers with removable tie-down inserts, pins/clips and vehicle-specific mounting hardware.
• No drilling required for manufacturer-listed truck applications. Follow the supplied part-specific installation instructions and torque chart.
• The matching front pair and four compatible spring-loaded turnbuckles are separately selected for a typical four-corner camper tie-down system.
• The removable inserts store separately when the camper is off the truck, leaving the main brackets close to the chassis.
• Optional lock accessories are selected separately; the F2031A Talon set includes a Tie Down Finishing Kit as identified by TorkLift. Other finishing accessories, if desired, are sold separately.
• Made in the USA and supported by TorkLift's Legendary Lifetime Warranty.

Check truck payload and camper anchor requirements before installation. The tiedown kit does not increase the truck's permitted payload.