Description
The Maretron M1AR fuel flow sensor measures liquid flow from 2 to 100 litres per hour (0.53–26.4 US gallons per hour) when connected to a compatible Maretron FFM100 Fuel Flow Monitor. The sensor uses internal rotors to generate pulses that the FFM100 interprets into flow readings for a vessel's NMEA 2000 monitoring system.
Specifications
- Flow range: 2–100 L/h (0.53–26.4 US gal/h)
- Connections: 1/4-inch female NPT ports
- Nominal K-factor: 1,000 pulses per litre; use the individual sensor's marked K-factor for setup
- Housing: aluminum; rotors: PPS; shafts: stainless steel
- Maximum operating pressure: 1,000 psi (68.95 bar)
- Operating temperature: -40°C to 80°C
- Size: 74 × 71 × 48.6 mm; weight: approximately 775 g
- Attached cable length: 1 m
Installation
The M1AR is a flow sensor, not a standalone NMEA 2000 device. It connects to FFM100 electronics, which must be configured with the sensor's K-factor. Use for compatible clean petroleum-based fuels or fluids within the specified range, install suitable plumbing and filtration, and check actual engine supply-flow requirements before selecting this size.
Estimate shipping
Recently viewed
You may also like
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

