Description
Keep compatible analogue marine instrument transducers working with a SeaTalkng instrument system using the Raymarine iTC-5 (E70010). The converter takes signals from speed/temperature, depth, wind, rudder-angle and compatible compass sensors and makes their data available to supported network instruments. A single iTC-5 can replace the need for several individual transducer pods.
Technical details
- Five analogue transducer connection groups, using spade terminals.
- SeaTalkng backbone connections plus one SeaTalkng spur port.
- 12 V DC nominal supply; 9–16 V DC operating range.
- Typical consumption 1.5 W; peak operating current under 150 mA; LEN 3.
- IPX2 splash-resistant enclosure; operating temperature -15°C to +55°C.
Instrument compatibility and calibration
Designed for supported Raymarine SeaTalkng instrument systems, including i70 and suitable ST70/ST70+ configurations. Correct calibration is essential: the i70 provides full transducer calibration, while ST70/ST70+ can calibrate depth, wind and speed/temperature but not rudder or compass. ST40, i40, i50, i60 and ST60+ displays cannot calibrate sensors connected through an iTC-5. Check the display and transducer combination before ordering.
Supplied with E70010
Includes the iTC-5 interface, two fixing screws, documentation and a 400 mm SeaTalkng spur cable (A06038). Transducers and instrument displays are separate. Mount the converter in a protected location; its IPX2 rating is for splash resistance rather than open-deck immersion.
Estimate shipping
Recently viewed
You may also like
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

