Remote cable waste valves let the shutoff gate sit near the RV holding tank while the pull handle is mounted where it can be reached. Valterra offers different valve sizes, stainless-inner-wire and polymer cable styles, and separate replacement cables. Choose the correct assembly and routing length before installing.
Compare the actual products
Each photograph is from the corresponding NewRVParts listing. Select a photo to view that product's full details.
TC372 — 3-inch cable valve with 72-inch stainless cableOne 3-inch valve and stainless-inner-wire remote cable
TC172 — 1½-inch cable valve with 72-inch stainless cableOne 1½-inch waste valve with 72-inch cable
TC1372 — dual 1½-inch and 3-inch stainless cable valvesTwo valves with two 72-inch stainless-inner-wire cables
TC372CN — 3-inch valve with polymer 72-inch cablePolymer cable version of the 3-inch remote valve kit
TC1372CN — dual valve kit with polymer 72-inch cables1½-inch and 3-inch valves with polymer cables
TC72PB — 72-inch replacement cable and handleReplacement stainless-inner-wire cable; valve sold separately
TC96PB — 96-inch replacement cable and handle96-inch replacement cable with handle, no valve
TC120PB — 120-inch replacement cable and handle120-inch replacement cable with handle, no valve
Compare the available valve and cable packages
| Valterra part | Valve or cable | Cable length | Package |
|---|---|---|---|
| TC172 | 1½-inch valve, stainless-inner-wire cable | 72 inches | One valve with remote cable and handle |
| TC372 | 3-inch valve, stainless-inner-wire cable | 72 inches | One valve with remote cable and handle |
| TC1372 | 1½-inch and 3-inch valves, stainless cables | Two × 72 inches | Dual-valve package with two cable controls |
| TC372CN | 3-inch valve, polymer cable | 72 inches | Polymer cable version with remote handle |
| TC1372CN | 1½-inch and 3-inch valves, polymer cables | Two × 72 inches | Dual-valve polymer-cable package |
| TC72PB | Replacement cable and handle, stainless inner wire | 72 inches | Cable and handle without valve |
| TC96PB | Replacement cable and handle, stainless inner wire | 96 inches | Cable and handle without valve |
| TC120PB | Replacement cable and handle, stainless inner wire | 120 inches | Cable and handle without valve |
Cable routing and handle placement
Valterra's installation instructions call for at least 6 inches of straight cable leaving both the valve and handle, with a minimum 24-inch bend diameter for a 180-degree turn. Do not loop the cable. Keep the installation spacer at the handle until the wire and housing are secured to the valve, then remove it after checking movement. Open the original installation drawing to see proper cable support and routing.
Valterra's cable installation illustration
The original two-page instruction sheet shows cable attachment, routing and bend limitations. Open it to enlarge the diagrams.
Open the PDF separately to enlarge it on your phone.