Stromberg Carlson JBP-69.625
6 × 9 × ⅝ in · 4 pads per manufacturer pack
Compact size for appropriately sized tongue-jack, scissor-jack and landing-gear feet.
Stromberg Carlson Base Pads: EPDM Sizes & Pack Quantities
Stromberg Carlson's molded EPDM base pads sit beneath suitable RV tongue jacks, scissor-jack feet and landing gear. They provide a resilient surface to support the jack foot on a campsite, and the four manufacturer part numbers differ in footprint, thickness and number of pads per package. Choose by the actual jack-foot dimensions and the number of support points you need.
Measure the jack foot, not just the RV
Check the footplateMeasure the complete contact surface of each jack foot. The rubber pad needs enough surrounding area to support the footplate securely and stay centred.
Match the footprintThese pads come in 6 × 9, 10 × 11 and 12 × 14-inch footprints. Stromberg Carlson specifically excludes a premium 9-inch landing-gear foot from its smallest 6 × 9-inch option.
Count your support pointsThe manufacturer's catalog lists four pads per JBP-69.625 package, two for the one-inch JBP-1011.1 and JBP-1214.1 packages, and one for the thicker JBP-1214.2.
Capacity and stability: Stromberg Carlson lists an evenly loaded capacity of up to 30,000 lb for this molded EPDM base-pad line. This is a base-pad material rating, not a new rating for your jack, trailer or levelling system. The pad must remain properly supported on suitable ground, with loads and jack extension kept within the manufacturer's limits.
JBP base pad dimensions and pack sizes
All four versions use solid molded EPDM rubber rather than crumb rubber. They resist water, UV exposure and mold, and can be cleaned and stored between trips. The model designation identifies the supplied size; the larger pads are not necessarily the right choice if they interfere with nearby equipment.
| MPN | Footprint and size | Thickness | Manufacturer pack | Product |
|---|---|---|---|---|
| JBP-69.625 | 6 × 9 × ⅝ in | ⅝ in | 4 pads | View |
| JBP-1011.1 | 10 × 11 × 1 in | 1 in | 2 pads | View |
| JBP-1214.1 | 12 × 14 × 1 in | 1 in | 2 pads | View |
| JBP-1214.2 | 12 × 14 × 2 in | 2 in | 1 pad | View |
Compare the four Stromberg Carlson pads
Each image and product link opens the exact NewRVParts listing. Use the full manufacturer part number to distinguish the one- and two-inch pads of the same 12 × 14-inch footprint.
Stromberg Carlson JBP-1011.1
10 × 11 × 1 in · 2 pads per manufacturer pack
Medium footprint with one-inch thick molded EPDM support.
Stromberg Carlson JBP-1214.1
12 × 14 × 1 in · 2 pads per manufacturer pack
Larger footprint, one-inch thickness, for larger compatible jack feet.
Stromberg Carlson JBP-1214.2
12 × 14 × 2 in · 1 pad per manufacturer pack
Same 12-by-14-inch footprint as the thinner version, but with a two-inch pad thickness.
Base pad questions
Are JBP-1214.1 and JBP-1214.2 the same thickness?
No. Both have a 12 × 14-inch footprint, but JBP-1214.1 is one inch thick and JBP-1214.2 is two inches thick. The manufacturer also lists two pads in the thinner pack and one in the thicker pack.
Will the smallest pad fit a nine-inch premium landing gear foot?
Stromberg Carlson's published fit comparison marks the premium nine-inch landing-gear foot as not fitting the 6 × 9-inch pad. Compare its larger footprint options and the actual foot shape.
Are the pads permanently attached to the jacks?
No. These molded base pads are placed under suitable jack feet for support. They are different from Stromberg Carlson's Base Pad Shoe products, which are designed to remain attached to certain feet.
Can I use these pads to lift a trailer beyond jack capacity?
No. A base pad does not increase a jack's rated load or change the trailer's weight limits. Follow the jack and vehicle instructions for loading and safe ground support.
Can I use them under a scissor stabilizer?
Stromberg Carlson lists appropriate scissor-jack feet among the intended uses. Confirm your specific stabilizer foot fits safely on the selected pad and follow its operating instructions.
Related RV jack references
- Stromberg Carlson JET Electric Tongue Jacks: Capacity & Parts
- RV Awning & Leveling Jack Parts Diagrams by Model
Verify the jack foot's shape and the actual campsite surface before placing load on the system.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts