The right marine tank vent depends on more than the hose diameter. Sea-Dog offers straight, angled and flush styles in different materials, and its 352100-1 chrome-plated zinc model carries a freshwater-use recommendation. This parts guide compares four currently listed models so you can choose by actual fitting details rather than appearance alone.

Check the intended tank service.

Application matters: manufacturer guidance recommends the chrome-plated zinc 352100-1 for freshwater. Do not select it for a fuel system solely because a listing calls it a gas-tank vent; confirm the proper vent material and installation requirements.

Four Sea-Dog tank vent configurations

Straight metal vent

352100-1 has a chrome-plated zinc body and straight 5/8-inch hose barb; Sea-Dog recommends it for freshwater use.

Angled stainless vent

352230-1 is a 90-degree design in investment-cast 316 stainless steel, with two screens.

Flush stainless vent

353230-1 combines a flush outer form with a 90-degree 5/8-inch hose connection.

Black nylon vent

357100-1 is a black, UV-resistant molded-nylon gas-tank vent with a straight hose barb.

Marine tank vent size and material table

The A and B dimensions below follow Sea-Dog's product drawings; each model uses its own drawing layout. Do not treat an A value as a common cutout dimension across the entire table.

MPN Material Style Hose barb Drawing A / B
352100-1 Chrome-plated zinc Straight 5/8 in A 1 in; B 2-1/8 in
352230-1 316 stainless steel 90-degree 5/8 in A 1 in; B 2-5/8 in
353230-1 316 stainless steel Flush, 90-degree 5/8 in A 2-9/16 in; B 1-13/16 in
357100-1 UV-resistant molded nylon Straight 5/8 in A 1 in; B 2-1/8 in

One hose size, different components

Each vent uses a 5/8-inch hose barb, but the body shape and recommended service vary. Stainless 352230-1 has two inlet screens, 353230-1 mounts flush, and 357100-1 is a black molded nylon design. Check the individual item before ordering.

What to verify before ordering

  1. Determine whether the vent is intended for freshwater or an approved fuel-tank application; check the original boat or tank manufacturer's specification.
  2. Confirm the hose is a compatible 5/8-inch vent line; size alone does not establish fuel-system approval.
  3. Choose a straight or 90-degree tail and flush or projecting head using the actual panel clearance and Sea-Dog drawing.
  4. Follow applicable marine fuel-vent installation and safety requirements; never obstruct or cap an operating tank vent.

See the matching Sea-Dog tank vents

Select an individual vent below to review the corresponding store item. Matching the number, hose direction and installation is more reliable than choosing from the finish alone.

Sea-Dog deck-fill caps, keys and emergency plugs   •   Sea-Dog boat drain plugs and garboard fittings

Save on Parts & Accessories

Sign up for special offers, new product updates, and deals on RV, truck camper, towing, truck, and marine parts and accessories.

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts