RV propane service pressure is checked with specialized low-pressure equipment, not an ordinary cylinder gauge. A technician may use a 0–35 inch-water-column gauge, a suitable test hose and the correct appliance or line-pressure adapter. This parts guide compares complete Marshall Excelsior and Camco kits with their separate replacement gauges, hoses and adapters so you can identify the right equipment by exact part number.
Know the components of a low-pressure test kit
The functional diagram below identifies components—not a test procedure. Actual test locations and allowable pressure values depend on the RV regulator, appliance manufacturer's service information and applicable gas regulations.
Pressure-measuring equipment
Other service items—not the same tool
Marshall Excelsior ME50P-2 versus adjustable gauge models
Marshall Excelsior specifies the ME50P-2 as a complete kit with a non-adjustable gauge. The ME60P-2 complete kit family uses an adjustable gauge. The separately catalogued ME60-2 is the adjustable gauge component with a 1/4-inch male NPT connection, not the full ME60P-2 kit.
Camco 10389 is another 0–35 in WC test kit with an analog gauge, hose, brass test fitting and case. For the Marshall service kit, ME50-H is the factory-listed replacement hose and bell. The ME1328 and ME1331 manometer adapters are listed for 3/8-inch and 1/2-inch outside-diameter connections respectively; that size is not a universal substitute for identifying the actual port.
All gas-pressure diagnosis, test-port access and any changes to a regulator or appliance gas connection should be carried out by qualified RV/LP-gas service personnel.
Exact product numbers and their purposes
| Part number | What it is | View item |
|---|---|---|
| ME-KIT-1 | Complete low-pressure RV test kit | Compare exact item |
| ME50P-2 | Non-adjustable gauge test kit | Compare exact item |
| 10389 | Camco low-pressure test kit | Compare exact item |
| ME60-2 | Adjustable replacement gauge | Compare exact item |
| ME50-H | Replacement hose and bell | Compare exact item |
| ME1328 | 3/8-inch OD manometer adapter | Compare exact item |
| ME1331 | 1/2-inch OD manometer adapter | Compare exact item |
| ME-LD2 | Leak-check liquid, separate purpose | Compare exact item |
Compare actual gauges, hoses and test-kit photographs
These product cards link directly to matching NewRVParts listings. Items ship from supplier warehouses and are not available for in-person viewing or pickup. Check current availability and the exact manufacturer number before ordering service equipment.








Factory pressure-test equipment references
Marshall Excelsior publishes a ME50/ME60 test-kit comparison and a separate ME60-2 gauge specification. Its manometer adapter family includes ME1328 and ME1331. The actual service procedure and acceptable readings are determined by the equipment's approved service literature.
