A 7-blade tow-vehicle connector can be used with different trailer plug formats, but a plug adapter, a dual-output connector and a circuit tester are not the same accessory. This guide compares three Pollak parts by the connection they make and the problem each is intended to solve.

Start with the plug that is actually on the trailer

4-way flat

A common trailer-light connector. If the vehicle has a compatible 7-blade socket, the flexible 7WB-143V provides a matching 4-flat trailer connection.

5-way or 4-way flat

7WB-178PFV provides dual 5-flat and 4-flat outputs from a 7-blade vehicle-side interface. Verify the installation and available tow-vehicle circuits.

Diagnose the socket

7WB-199PDV is an LED circuit tester for the vehicle's 7-blade socket. It does not change connector type or substitute for a proper trailer wiring inspection.

Connection safety: An adapter does not create functions absent from the tow vehicle. Trailer brakes, auxiliary power, reverse-light and lighting circuits must be supplied and wired as required for the trailer. Check the actual pin assignments and electrical installation before connecting.

Pollak 7-blade adapter and tester part-number chart

Pollak part Component Vehicle-side interface Trailer-side connection
7WB-143V 7-blade to 4-flat flexible adapter 7-blade RV socket 4-way flat plug
7WB-178PFV Dual 4-flat / 5-flat adapter 7-blade vehicle-side connection 4-way and 5-way flat
7WB-199PDV 7-blade LED circuit tester 7-blade vehicle socket No trailer outlet

Why the three parts are different

7WB-143V: A flexible-wire adapter between a compatible 7-blade vehicle socket and a 4-flat trailer plug. It is intended for a trailer needing the appropriate four-way lighting connections; it does not add electric-brake controls.

7WB-178PFV: A dual-output 7-blade-to-5/4-flat connection option. It is intended for trailer owners who need 4-way or 5-way flat outputs. Confirm the mating interface and vehicle wiring before treating it as a replacement for an existing socket.

7WB-199PDV: A polarized LED 7-blade socket circuit tester. Its lights help verify socket continuity, but the tester is not an adapter and cannot guarantee correct trailer braking or rule out every fault under load.

Match the Pollak part to your vehicle and trailer

Before towing

Identify the vehicle-side and trailer-side connectors, inspect the socket for corrosion or damage, and confirm all required lamps and safety functions operate after connection. Follow the tow vehicle and trailer manufacturers' wiring diagrams if an electrical fault remains. Keep the connection secure and protect unused contacts from dirt and moisture.

For other connector combinations, see the CURT trailer wiring adapter selection guide.

Common questions

Will a 7-blade-to-4-flat adapter provide trailer brake power?

No. A four-way flat connection does not itself provide the separate electric-brake circuit required by an electric-brake trailer.

Is 7WB-178PFV the same as a simple 4-flat pigtail?

No. It is a dual-output connection design supporting 4-way and 5-way flat trailer connections from a suitable 7-blade vehicle interface.

Does 7WB-199PDV repair a wiring problem?

No. It is a diagnostic tester for the vehicle socket. Any missing or incorrectly connected circuits still need proper troubleshooting and repair.

Quick product links: 7WB-143V · 7WB-178PFV · 7WB-199PDV

Save on Parts & Accessories

Sign up for special offers, new product updates, and deals on RV, truck camper, towing, truck, and marine parts and accessories.

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts