
Lippert Solid Step 4.0 Parts Diagram, Models and Fit Chart
Lippert Solid Step 4.0 is a ground-supported manual RV entry system with folding steps, ratcheting adjustable legs and a doorway stow position. Use the factory identification diagram and model chart to choose between the six complete 26-inch and 30-inch assemblies.
Solid Step 4.0 steps have a 500 lb rated capacity. The two-step versions fold manually without lift assist; the listed triple and quad assemblies include integrated lift-assist hardware. Measure both the ground-to-threshold height and the entry-frame opening before choosing a part number.
Solid Step 4.0 part numbers, heights and door widths
Lippert defines doorway width as the distance measured from flange to flange, rather than the advertised nominal door size. The factory door label sizes appear in the chart below.
| Lippert MPN | Steps | Nominal size | Entry height | Flange-to-flange width | Lift assist |
|---|---|---|---|---|---|
| 2024056996 | Double | 26-inch | 22β28 in | 23.75β27.5 in | No |
| 2024056997 | Double | 30-inch | 22β28 in | 27.75β34.5 in | No |
| 2024056998 | Triple | 26-inch | 27.5β39.5 in | 23.75β27.5 in | Yes |
| 2024056999 | Triple | 30-inch | 27.5β39.5 in | 27.75β34.5 in | Yes |
| 2024057000 | Quad | 26-inch | 35.5β46.5 in | 23.75β27.5 in | Yes |
| 2024057001 | Quad | 30-inch | 35.5β46.5 in | 27.75β34.5 in | Yes |
The 26-inch versions serve factory-labelled 26- to 28-inch doors. The 30-inch versions serve labelled 30- to 34-inch doors, provided the actual flange-to-flange width also falls within the range above.
Solid Step 4.0 factory component identification
The Lippert assembly image identifies the top tread, full tread, transport lock, plunger bolt and latching hardware. Use these component names when examining an existing step, rather than assuming similar-looking parts from SolidStep 3.0 will interchange.

Lift-assist versus standard double-step assemblies
In the Solid Step 4.0 range, the triple and quad versions use lift-assist hardware to reduce the effort required to lift or lower the steps. The double versions do not use the same assembly. Keep these differences in mind when identifying latches, legs and mounting hardware.
View the manufacturer lift-assist assembly diagram

Solid Step 4.0 product photographs
Each exact Lippert part number below links to a matching NewRVParts product listing. Use the size chart to narrow the choices before comparing the step photographs.






Check the doorway before replacing RV steps
Measure the flange-to-flange opening, the step height and the available swing clearance. Doors, entry trim, skirting and wheel-well covers can affect the installation even when the nominal doorway size seems correct.
Related RV step reference pages
Manufacturer sources: Lippert official Solid Step fit chart and manufacturer drawings and installation manuals.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts