Husky 33162
Fifth-wheel kingpin stand · One stand; no locking cup
Tripod stand for compatible fifth-wheel kingpin areas while parked.
Husky RV Stabilizers: Kingpin, Scissor Jack & Slide-Out Sizes
RV stabilizers are not all designed for the same location or task. Husky offers fifth-wheel kingpin tripods, permanently mounted scissor stabilizers and separate slide-out supports. Choosing the correct type starts with the original equipment's instructions, the working height and the package quantity—not just the product's advertised capacity.
Where is the stabilizer used?
Fifth-wheel kingpin tripodPlaced beneath a compatible fifth-wheel kingpin while parked. Models 33162 and 33163 have different height ranges and hitch-cup construction.
Frame-mounted scissor jackInstalled at suitable frame positions to limit movement when the trailer is parked. Scissor stabilizers are not intended for tire changes or lifting a trailer.
Separate slide-out supportInstalled only where the slide-out manufacturer expressly permits separate supports. Improper support can damage slide mechanisms or structures when a trailer settles.
Important: Never use these stabilizers in place of the RV's approved leveling and lifting system. Many slide-out manufacturers advise against separate slide-out support jacks; verify your particular slide system before using them. A support sold for slide-outs is not automatically approved for yours.
Husky stabilization product comparison by MPN
Sizes and quantities are tied to the listed manufacturer part numbers. A product sold as one scissor jack is not the same package as a two-jack set. Check the installed frame and available clearance before making a replacement choice.
| MPN | Component | Height or size | Rating | Supplied | Product |
|---|---|---|---|---|---|
| 33162 | Fifth-wheel kingpin stand | 33–55 in adjustable height | 5,000 lb | One stand; no locking cup | View |
| 33163 | Fifth-wheel kingpin stand | 34–56 in adjustable height | 5,000 lb | One stand; locking hitch cup | View |
| 76862 | Manual scissor jack | 4-5/16 in minimum; 24 in maximum | 7,500 lb | Two jacks; crank included | View |
| 88121 | Manual scissor jack | 4-5/16 in minimum; 24 in maximum | 5,000 lb | Two jacks; crank included | View |
| 88124 | Manual scissor jack | 4-5/16 in minimum; 30 in maximum | 5,000 lb | Two jacks; crank included | View |
| 88125 | Manual scissor jack | 4-5/16 in minimum; 30 in maximum | 5,000 lb | One jack; no crank | View |
| 81079 | Slide-out support pair | 16½–29¼ in adjustable height | Not a lifting jack | Two supports | View |
| 81080 | Slide-out support pair | Check exact model measurements | Not a lifting jack | Two supports | View |
| 81081 | Slide-out support pair | 26¼–49¼ in adjustable height | Not a lifting jack | Two supports | View |
Compare the genuine Husky stabilizers
Product images and links lead directly to the matching NewRVParts listings. Check the mounting style, height range and exact included components on your original setup.
Fifth-wheel kingpin tripod stands
Husky 33163
Fifth-wheel kingpin stand · One stand; locking hitch cup
Kingpin tripod with lockable hitch cup.
Manual RV scissor stabilizer jacks
Husky 76862
Manual scissor jack · Two jacks; crank included
Two-piece steel frame stabilizer set for an appropriate mount.
Husky 88121
Manual scissor jack · Two jacks; crank included
Two-piece scissor jack set with square support brackets.
Husky 88124
Manual scissor jack · Two jacks; crank included
Taller scissor jack set with 30-inch maximum height.
Slide-out supports — use only when approved
Husky 81079
Slide-out support pair · Two supports
Shorter manually adjusted support set; check slide manufacturer instructions before use.
Husky 81080
Slide-out support pair · Two supports
Intermediate-height product; verify the installed support height against current manufacturer documentation.
Husky 81081
Slide-out support pair · Two supports
Longer support set for installations whose manufacturer permits separate slide-out supports.
Stabilizer selection questions
Does a 5,000-lb scissor stabilizer lift 5,000 lb for a tire change?
No. Scissor stabilizers are intended to limit movement on an appropriately parked and leveled RV, not for service lifting. Use the lifting points and equipment specified by your RV manufacturer.
What makes 33163 different from 33162?
Both are listed as 5,000-lb kingpin stabilizers, but 33163 includes a lockable hitch cup and has a 34–56-inch listed height range. Model 33162 is listed at 33–55 inches without that locking cup.
Is 88125 supplied as a pair like 88124?
No. 88125 is a single manual scissor jack without a crank handle, whereas 88124 is sold as a set of two with a crank handle. Check quantity before ordering.
Should I put jack stands under my slide-out room?
Not unless your slide-out manufacturer's documentation permits and describes that use. A separate support can apply damaging loads to slide mechanisms or structure as the RV moves or settles.
Related leveling and support references
For alternative stabilizer types and repair parts, see BAL scissor jack parts diagrams, BAL kingpin tripod parts references and our RV jack and leveling parts index.
Always follow the exact RV and stabilizer manufacturers' safety and installation instructions.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts