The CURT A16 16120 is a 16,000 lb fifth-wheel hitch for industry-standard rails. The maker's exploded view separates the head and body, left and right mounting legs, handle components and mounting-rail hardware into 14 callouts.
Manufacturer's numbered parts illustration
The factory drawing uses the same callout numbers as the reference table below. Open the document for a larger view or for the complete installation instructions.
Components by factory callout number
Quantities follow the illustrated assembly. A component without an individual purchasing number is listed for identification rather than linked to an unrelated item.
| Diagram no. | Qty. | Component |
|---|---|---|
| 1 | 1 | 16120 hitch body and head assembly |
| 2 | 1 | Mounting leg weldment |
| 3 | 1 | Driver-side mounting leg with instruction label |
| 4 | 1 | Handle assembly |
| 5 | 1 | Handle lock bar |
| 6 | 2 | M8 button-head cap screws |
| 7 | 2 | M8 locking nuts |
| 8 | 1 | Latch spring |
| 9 | 1 | ⅜-inch safety latch pin |
| 10 | 4 | M14 pilot hex bolts |
| 11 | 4 | 14 mm lock washers |
| 12 | 4 | 14 mm flat washers |
| 13 | 4 | Base-rail mounting clips |
| 14 | 4 | ½-inch base-rail mounting pins |
Before selecting a replacement
Use the complete CURT installation manual for assembly, inspections, installation and safe towing operation.
See the parts and assemblies
Compare the pictured NewRVParts product listings with the names and part numbers in the original diagram. Complete kits and individually sold components have their own ordering numbers.
