Find the correct motor, end cap, spring arm or Direct Response control component for a Carefree Freedom Freestyle Wall Mount awning. The factory drawing below shows where each numbered part fits, with photographs of matching replacement parts and model-specific selection details.

Freestyle, not standard Freedom WMFreestyle has lateral spring arms and no floor-standing support legs. It uses motor R001862, not the standard Freedom WM R001651 motor.
Identify the model and finishLook inside the left end of the awning case for the serial/part label. Match the case colour and original configuration.
Check arm length and revision2.57 m arms changed in June 2017. Long 4.5 m and 5 m awnings also have a separate centre arm.

Freedom Freestyle WM numbered factory parts diagram

Carefree's illustrated drawing identifies the left-hand motor, right-hand roller plug and case cap, spring arms, lead rail, switch and sensor module. Use the next page of the manual for the manufacturer's corresponding part numbers.

Manufacturer referenceCarefree Freedom Freestyle Wall Mount exploded factory awning parts drawing with item numbers, service manual printed page 19Open original manufacturer PDF
Carefree Freedom Freestyle WM exploded illustration (printed manual page 19). Open the full-size numbered drawing if the browser viewer is unavailable or the numbers are too small.

Freedom Freestyle WM replacement parts by number

These part numbers are specific to the Freestyle Wall Mount arrangement. Some parts also appear on other Freedom awnings, but that does not establish compatibility across complete awning assemblies. Compare the original serial number, finish, arm position and production date.

Drawing # Manufacturer part Component and selection Product
1–2 R001618XXX / R001861XXX Left case end capsOuter and inner end-cap assemblies differ; select by original finish and case configuration. —
3 R001862 Left-side tubular motor assemblyFactory motor assembly includes the motor, bearing and one-way drive; these are not separately supplied in the assembly. View part
4 610900-xxx.xx Roller tubeMatch overall length and existing fabric/roller configuration. —
5 R001623 Right roller-tube end plugFits inside the roller tube, not over the outside of the case. View part
6 R001620BLK Black right outer case capBlack finish of the R001620XXX end-cap family; separate from plug R001623. View part
8–11 R001811X-aa-xxx / R001621 Lead rail and ramp kitRail configuration depends on case colour, LED option and length. —
12–15 R001865 / R001864 / R001678 / R001680 Case connectors and lead-rail pivotsDifferent left/right parts; older connector designs may need the manufacturer's complete updated connector set. —
16 R001630 Spring-arm attaching hardwareOne-arm hardware pack; not included with replacement spring arms. —
17a–d R012530-TB68L / -TB76L / -TB79L / -TB94L Left spring arms2.44 m, pre-June 2017 2.57 m, later 2.57 m and 3 m-plus families have separate numbers. —
18a–d R012530-TB68R / -TB76R / -TB79R / -TB94R Right spring armsMatch right-hand position, awning length, extension and build date. —
19a–c R012530-TB94M / -TB76M / -TB79M Centre support armCentre arm is distinct from outer arms. Applies to 4.5/5 m or certain 4 m DX configurations. —
20 R019468-006 Black extend/retract control switchSpecific electric awning switch; verify existing switch and control wiring. View part
21 R060686-004 Direct Response sensor/control moduleLead-rail mounted sensor/control module; match the original system and connectors. View part
22–23 R001679 / R040616-206 Sensor bracket and cable channelMounting bracket and cable routing for the lead-rail control sensor. —
24–26 019867-001 / -002; 019868-001 / -002 Mounting brackets and screw packsCarefree differentiates 3–4 m brackets from 4.5–5 m brackets; mounting screws are separate. —
27 R060701-001 / -002 Sensor harness versionsSelect by the installed awning, including the special 8-foot configuration. —

Freestyle motor, switch, module and end-cap photographs

These individual replacement products are linked by their manufacturer numbers. The smaller roller-tube plug is not the same part as the outer case cap; the Direct Response module and wall switch also have different functions.

Choosing the right Freestyle WM replacement

Motor identification: Freestyle WM uses the R001862 motor assembly on the left side. It contains the motor, bearing and one-way drive. Do not substitute R001651 solely because it fits another Freedom awning.

Arms: The left and right outer spring arms have different numbers. The 2.57 m arm versions changed in June 2017. On 4.5 m/5 m models, the centre arm is different from outer arms and is identified by a blue dot on or near its case connector.

Controls: Compare the installed Direct Response module and wall switch labels before selecting replacements. These are separate electrical parts. Disconnect 12V power and secure the spring arms as instructed by Carefree before servicing the assembly.

Mounting: For 3–4 m and 4.5–5 m awnings, Carefree lists separate bracket packs. The manufacturer mounting screw packs are not automatically included with bracket sets.

Save on Parts & Accessories

Sign up for special offers, new product updates, and deals on RV, truck camper, towing, truck, and marine parts and accessories.

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts