Valterra EZ RV Sewer Hose Carriers: Fixed, Adjustable & Storage Parts

A dedicated exterior carrier keeps an RV sewer hose separate from other storage compartments and gives you an easier place to put it between trips. Valterra's EZ Hose Carrier range includes fixed-length tubes and adjustable versions that telescope to match a mounting location. Before choosing one, compare the hose's collapsed length, the widest fitting you intend to store, and the clear space available under or alongside your RV.

Choosing the right length and opening

Use these three measurements together. The guide shows which parts of the storage installation you are comparing; it is a selection diagram rather than a dimensioned installation drawing.

Fixed-length Valterra EZ sewer hose carriers

Fixed carriers keep their original length after installation. NewRVParts currently offers 26-inch and 46-inch versions in white or black, plus 64-inch and 94-inch black versions. These are separate exterior storage tubes; the sewer hose itself is not included. Valterra specifies mounting brackets and screws and a vented quarter-turn cap with retaining strap.

26-inch EZ Hose CarrierValterra A04-0150 · Fixed · white26-inch white exterior storage tube with quarter-turn vented end cap, mounting brackets and screws.See product26-inch EZ Hose CarrierValterra A04-0150XBK · Fixed · blackBlack 26-inch counterpart with vented cap and tether; a sewer hose is not supplied.See product46-inch EZ Hose CarrierValterra A04-0151 · Fixed · whiteA longer fixed-length white carrier with a 4½-inch inside diameter and mounting hardware.See product46-inch EZ Hose CarrierValterra A04-0151XBK · Fixed · blackBlack 46-inch tube, supplied assembled with mounting brackets, screws and cap-retaining strap.See product64-inch EZ Hose CarrierValterra A04-0153XBK · Fixed · blackFixed 64-inch storage length for a compatible hose and fittings; measure the RV mounting area first.See product94-inch EZ Hose CarrierValterra A04-0155XBK · Fixed · blackLong black fixed-length carrier with 4½-inch inside diameter and vented quarter-turn cap.See product

Adjustable EZ carriers for different mounting spans

The telescoping versions extend within a stated length range, making them useful where a fixed-length tube does not line up with the available mounting space. Both length families have a 4½-inch inside diameter; the adjustable tubes have a 4⅞-inch outside diameter. The longer 50–94-inch versions are supplied with sliding saddles as well as mounting hardware.

34–60-inch adjustable carrier

34–60-inch adjustable carrierValterra A04-3460 · Adjustable · whiteTelescoping tube with mounting brackets and screws, vented twist-lock caps and retaining straps.See product34–60-inch adjustable carrierValterra A04-3460BK · Adjustable · blackBlack 34–60-inch version, with a 4½-inch inside diameter and 4⅞-inch outside tube diameter.See product

50–94-inch adjustable carrier

50–94-inch adjustable carrierValterra A04-5094 · Adjustable · whiteLong telescoping carrier with mounting brackets, screws and sliding saddles for supported installation.See product50–94-inch adjustable carrierValterra A04-5094BK · Adjustable · blackBlack adjustable 50–94-inch model. Valterra includes sliding saddles with this length range.See product

Separate storage for elbows and mounting parts

If your 90-degree sewer elbow is too large for the 4½-inch tube, Valterra A04-0100BK is a compact 15-inch accessory carrier with a larger 5½-inch opening. Valterra also offers sliding saddles for positioning and supporting compatible EZ carrier installations. Match the mounting components to your carrier model before ordering.

15-inch EZ Accessory CarrierValterra A04-0100BK · Accessory · black5½-inch opening for storing compatible 90-degree sewer elbows and fittings separately from the hose.See productAdjustable sliding support saddlesValterra A04-0160BK · Accessory · black · pairTwo sliding saddles for mounting a compatible Valterra EZ carrier; no carrier tube is included.See product

Valterra sewer hose carrier sizes and model numbers

The 15-inch A04-0100BK accessory carrier is not the same tube type: its opening measures 5½ inches and it is intended for compatible sewer fittings and elbows. The A04-0160BK is a support-saddle pair, not a complete tube.

Before mounting or storing your sewer hose

1. Check the full stored assembly. Collapse the hose as it will be stored and measure its widest attached connector. Do not rely on the hose's advertised extended length.
2. Confirm the RV mounting space. Keep access to the end caps and ensure the carrier location does not interfere with ground clearance, suspension movement, brake lines or other underbody equipment.
3. Choose fixed or adjustable. A fixed tube gives a known length. Use an adjustable carrier when the available mounting span calls for a telescoping range; do not assume it can telescope beyond the stated minimum or maximum.
4. Use compatible supports. The Valterra carriers include model-specific mounting hardware. Additional saddles are separate accessories and should be used only where appropriate for the carrier and mounting surface.
5. Rinse before storing. Clean and drain the sewer hose, close the vented carrier caps securely, and check the retention straps. The caps are designed to vent the tube, not to make a wet hose sanitary.

Need to identify bayonet fittings, elbows or replacement sewer hose parts? See our Camco RhinoFLEX sewer hose and fitting guide.

Valterra also provides fixed-length EZ carrier product information, adjustable carrier details and the EZ accessory carrier specifications.