RV Door Holders: JR Straight, 45° & 90°

An RV entry door or compartment hatch that won't stay open may need a new holder—but straight T-style, angled T-style and spring-loaded catches are different hardware. JR Products supplies several styles that solve different clearance and mounting problems. Use this guide to identify the shape and part number before buying.

Four types of RV door holders

Straight T-style

A T-ended arm engages a matching receiving bracket. Choose the correct reach and check the existing screw pattern.

45° angled

Offsets the arm's approach where the door, wall or nearby hardware limits a straight run.

90° angled

Designed for a turn in the holder arrangement. Confirm whether your old part uses the same bracket geometry.

Spring-loaded

A separate retaining-catch style commonly used to prop open baggage and storage compartment doors.

Simplified shapes show the general holding method, not exact part outlines or mounting directions. Use the linked product photographs to identify physical hardware.

JR Products door-holder part-number chart

These specifications apply to the individual JR part numbers listed; similarly sized parts do not necessarily share mounting footprints.

JR part	Holder design	Listed size	Construction	Selection detail
JR 10335	Spring-loaded baggage catch	2 in	Die-cast aluminum	For holding compatible compartment or baggage doors open
JR 10515	Straight T-style	4 in	Stainless steel	Straight-arm format for compatible T-style catches
JR 10525	Straight T-style	6 in	Stainless steel	Longer version of the stainless straight T-style holder
JR 11765	45° angled T-style	Verify original	Stainless steel	Angled design intended to work around nearby obstructions
JR 11785	90° angled T-style	4 in	Stainless steel	Not an exact replacement for plastic-style holders
JR 06-11875	90° angled T-style	6 in	304 stainless steel	Manufacturer-listed replacement for JR 10605 and 10625

Two important model differences: JR 11785 is a 4-inch stainless 90° T-style holder, but the manufacturer does not classify it as an exact replacement for plastic-style holders. JR 06-11875 is the 6-inch true 90° model that the manufacturer specifically lists as a replacement for JR 10605 and 10625. Do not assume the same interchange applies to other model numbers.

Check your mounting before you order

1. Match the mechanismIs it a T-head that slides into a socket, or a spring-loaded baggage-door retainer? The retaining hardware must suit the holder type.

2. Check reach and angleCompare the listed 2, 4 or 6-inch style where applicable. Look for awning arms, trim, windows or seals in the door's path.

3. Compare the actual mountingMeasure mounting-hole spacing, available backing and the open-door position. Check the door and body surfaces rather than relying on the length label alone.

Shop these exact JR holders — product photos

Open the matching listing for the current product image and ordering details. These links go directly to NewRVParts products.

JR Products 10335 2-inch spring-loaded catch product listing photo

JR 10335 — 2-inch spring-loaded catchDie-cast aluminum; spring-loaded baggage catch. Compare the picture and installation shape with your existing catch.View product and availability

JR Products 10515 4-inch straight T-style holder product listing photo

JR 10515 — 4-inch straight T-style holderStainless steel; straight t-style. Compare the picture and installation shape with your existing catch.View product and availability

JR Products 10525 6-inch straight T-style holder product listing photo

JR 10525 — 6-inch straight T-style holderStainless steel; straight t-style. Compare the picture and installation shape with your existing catch.View product and availability

JR Products 11765 45-degree T-style holder product listing photo

JR 11765 — 45-degree T-style holderStainless steel; 45° angled t-style. Compare the picture and installation shape with your existing catch.View product and availability

JR Products 11785 4-inch 90-degree T-style holder product listing photo

JR 11785 — 4-inch 90-degree T-style holderStainless steel; 90° angled t-style. Compare the picture and installation shape with your existing catch.View product and availability

JR Products 06-11875 6-inch true 90-degree T-style holder product listing photo

JR 06-11875 — 6-inch true 90-degree T-style holder304 stainless steel; 90° angled t-style. Compare the picture and installation shape with your existing catch.View product and availability

Common replacement mistakes

Choosing by colour alone: many metal catches have a similar silver finish even though their arms sit at different angles. Assuming every T-style bracket interchanges: check both the arm and the receiver. Ignoring the door-open position: a catch that is long enough may still foul an awning arm or trim when the door swings out.

If an original label is available, use its JR Products part number as your first match and then verify the photographed hardware and installation dimensions.

Related RV entrance and exterior guides

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts

JR Products RV Door Holders: Straight, Angled & Spring Catches