The Winegard Sensar is raised by a roof-mounted lift mechanism and controlled by an indoor crank and directional handle. Its original numbered parts diagram separates the lift tubes, antenna head, gear housing, roof base and crank components, making it easier to identify the correct replacement.
View Available Parts With Photos
Manufacturer part numbers
| Drawing callout | Winegard part | Component |
|---|---|---|
| 2 | RVW-205 | Sensar IV amplified head with Wingman |
| 3 | RP-2900 | Two elevating tubes, clips, grommets, pins and bumper |
| 4 | RP-2000 | Leveling mount for early antenna versions |
| 5 | RP-0154 | Weather boot for earlier coax connections |
| 6 | RP-3000 | Elevating gear |
| 7 | RP-4000 | 12.25-inch worm gear and hex elevating shaft |
| 8 | RP-2049 | Gear housing with bearings and seals |
| 9 | RP-3523 | Roof baseplate, ten screws and rubber boot |
| 10 | RP-6300 | White directional handle, spring and ceiling plate |
| 11 | RP-6822 | Directional handle spring |
| 12 | RP-2658 | Nylon crank bearing |
| 13 | RP-6795 | White elevation crank with set screw |
| 14 | RW-2000 | Exterior wedge for sloped RV roof |
| 15 | IW-5012 | Interior ceiling wedge |
| 16 | EK-1036 | Directional handle extension |
Complete antenna assemblies and associated electrical parts
| Part | Product | Selection note |
|---|---|---|
| RV-3095 | Complete Sensar roof antenna | Check the exact head and mounting configuration |
| RV-7095 | Separately numbered complete Sensar antenna | Do not presume it includes the same head as RV-3095 |
| RVW-395 | Complete Sensar antenna assembly | Not equivalent to a replacement head or a lift-tube kit |
| RV-7042 | White antenna wall-plate power supply | Verify original coaxial and 12V plate connections |
| Roof obstruction clearance | 16-inch minimum for Sensar IV | Different from earlier Winegard installation layouts |
| Roof thickness | Standard system 1–4.75 inches | For thicker roofs, check the EK-1036 extension instructions |
Original manufacturer diagrams
Original Sensar exploded lift and crank parts drawing
Before replacing a part
RP-2900 includes the lift tubes and related attachment hardware, not the RP-3523 baseplate or replacement antenna head. The RVW-205 Sensar IV head requires 16-inch clearance around the lift. Check the original roof thickness and mechanical components, disconnect wall-plate power before work and reseal all roof penetrations correctly.
Winegard manufacturer information
Sensar original replacement-package chartWinegard RP-2900 manufacturer product detailsWinegard RP-3523 baseplate packageRelated Winegard guides
Matching products and replacement photographs
Choose a photo to open its individual NewRVParts listing.
RP-2900 — Sensar two elevating tubes, pins, clips, grommets and bumperView exact part and product details
RP-3523 — Sensar baseplate, mounting screws and rubber bootView exact part and product details
RVW-205 — Sensar IV amplified antenna head with integrated WingmanView exact part and product details
RV-3095 — Complete roof-mounted crank-up antennaView exact part and product details
RV-7095 — Separately numbered complete antennaView exact part and product details
RVW-395 — Complete Winegard Sensar antenna assemblyView exact part and product details
RV-7042 — Separate Winegard 12V antenna power wall plateView exact part and product details