The Sea-Dog SD-13 is a compact push-to-reset thermal circuit breaker for appropriate electrical panels. It is available with #8-32 screw terminals or ¼-inch quick-connect blades and multiple amp ratings. Choose the current rating required by the original protected circuit, then match the installed connection and panel dimensions.

SD-13 terminal and current comparisons

The table compares exact manufacturer numbers and separates electrical ratings from mechanical fit. On small screens, scroll horizontally to see all specifications.

Sea-Dog MPN Amps Connection Reset DC limit
830111 5A #8-32 screw terminals Push-reset 50V DC
830112 7A #8-32 screw terminals Push-reset 50V DC
830113 10A #8-32 screw terminals Push-reset 50V DC
830114 15A #8-32 screw terminals Push-reset 50V DC
830115 20A #8-32 screw terminals Push-reset 50V DC
830116 25A #8-32 screw terminals Push-reset 50V DC
830117 30A #8-32 screw terminals Push-reset 50V DC
830118 40A #8-32 screw terminals Push-reset 50V DC
830150 3A ¼-in quick-connect blades Push-reset 50V DC
830151 5A ¼-in quick-connect blades Push-reset 50V DC
830152 7A ¼-in quick-connect blades Push-reset 50V DC
830153 10A ¼-in quick-connect blades Push-reset 50V DC
830154 15A ¼-in quick-connect blades Push-reset 50V DC
830155 20A ¼-in quick-connect blades Push-reset 50V DC
Important fit distinction: A breaker with the same amp rating but a different terminal type is not an automatic plug-in replacement. Sea-Dog uses #8-32 screws on 830111–830118 and ¼-inch blade terminals on 830150–830155. The SD-13 maximum ratings are 250V AC or 50V DC, but suitability for a particular marine or RV AC branch circuit must be established by the electrical design. Never increase the breaker rating to stop nuisance trips.

Shared case reference: Sea-Dog lists body drawing dimensions A = 1⅜ inches, B = 7/16 inch, C = 1¼ inches and D = 9/16 inch, with a 3/16-inch panel-depth reference. The exact measurement positions are shown in the manufacturer diagram. The optional 830901 breaker boot is a separate accessory and is not included in these product cards.

Manufacturer dimension and specification references: quick-connect, screw-terminal. These include the original switch and breaker drawings.

What to check before selecting a replacement

  1. Read the original breaker amp rating. Never substitute a higher setting merely because the existing device opens the circuit.
  2. Inspect the back: screw terminals require different connectors from quarter-inch push-on blades.
  3. Confirm available rear-panel space and the original opening using the manufacturer's diagram; the listed 3/16-inch panel-depth reference is not a generic cutout diameter.
  4. Confirm DC or AC use and the relevant interruption rating for the actual circuit, not voltage alone.
  5. Correct the underlying overcurrent fault before resetting a tripped breaker and restore proper protective covers where specified.

Find matching Sea-Dog parts

Select an exact product to review its details and online availability. NewRVParts ships from supplier warehouses; products cannot be viewed or picked up in person.

Continue with panel-mount SD-17 breakers, surface-mount SD-17 breakers. For more general electrical switching see our Sea-Dog maintained-versus-momentary toggle comparison. For inline fuse components, visit the Sea-Dog AGC fuse-holder selection guide.

Bulletin des pièces de VR

Inscrivez-vous pour nos prochaines promotions !

À propos de NewRVParts

NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.

Magasiner les pièces de VR