STP-201MORryde StepAbove Gen 2 2-step RV entry assemblyView product
MORryde StepAbove Gen 2 Parts Guide and Doorway Fit Chart
MORryde StepAbove Gen 2 RV steps provide a ground-supported, manual entry staircase that folds into the doorway for travel. The factory model list has different step heights, rises and doorway widths. Use the chart below to match your actual RV opening rather than assuming that every two-, three- or four-step version will fit.
These standard StepAbove Gen 2 models have a 500 lb rated capacity, quick-release mounting and adjustable support legs. Strut-assist models are a separate configuration with different installation and measurement requirements.
MORryde StepAbove Gen 2 model and doorway chart
The manufacturer lists both the door size printed on the factory label and the actual opening measured from flange to flange. Check the ground-to-threshold height range and the rise before selecting a model.
| MORryde MPN | Steps | Step height | Step rise | Door label | Flange-to-flange width |
|---|---|---|---|---|---|
| STP-201 | 2 | 25–29.5 in | 9 in | 24-inch | 21.75–22.25 in |
| STP-202 | 2 | 25–29.5 in | 9 in | 26–28-inch | 23.75–26.25 in |
| STP-203 | 3 | 34–37 in | 9 in | 24-inch | 21.75–22.25 in |
| STP-204 | 3 | 30–33.5 in | 8 in | 24-inch | 21.75–22.25 in |
| STP-206 | 3 | 30–33.5 in | 8 in | 26–28-inch | 23.75–26.25 in |
| STP-207 | 3 | 34–37 in | 9 in | 26–28-inch | 23.75–26.25 in |
| STP-208 | 3 | 30–33.5 in | 8 in | 30–32-inch | 27.75–30.25 in |
| STP-209 | 3 | 34–37 in | 9 in | 30–32-inch | 27.75–30.25 in |
| STP-212 | 4 | 37.5–42 in | 8 in | 26–28-inch | 23.75–26.25 in |
| STP-213 | 4 | 37.5–42 in | 8 in | 30–32-inch | 27.75–30.25 in |
For example, STP-206 and STP-207 are both for the 26- to 28-inch labelled door family, but they have different step rises and height ranges. Similarly, STP-208 and STP-209 are not identical despite their shared nominal doorway size.
Gen 2 hinge and latch installation drawings
MORryde's original installation guide shows the hinge plate against the threshold, the top-corner mounting screws, the latch engagement and adjustment, and the final hinge-plate fastening. The steps must be correctly seated in the doorway before the door is tested.
MORryde StepAbove Gen 2 factory drawing
MORryde uses distinct doorway width, height and step-rise combinations. The exact STP model and door measurements appear in the table above; open the installation PDF for hinge-plate and latch-placement drawings.
Open manufacturer installation drawingView MORryde's complete original doorway qualification guide for the dimensions and installation conditions that need to be checked before purchase.
StepAbove Gen 2 models with product photographs
Compare the standard two-, three- and four-step Gen 2 models below. The listed models vary in length and doorway width, so use their MPNs alongside the chart rather than selecting by photo alone.
STP-202MORryde StepAbove Gen 2 2-step RV entry assemblyView product
STP-203MORryde StepAbove Gen 2 3-step RV entry assemblyView product
STP-204MORryde StepAbove Gen 2 3-step RV entry assemblyView product
STP-206MORryde StepAbove Gen 2 3-step RV entry assemblyView product
STP-207MORryde StepAbove Gen 2 3-step RV entry assemblyView product
STP-208MORryde StepAbove Gen 2 3-step RV entry assemblyView product
STP-209MORryde StepAbove Gen 2 3-step RV entry assemblyView product
STP-212MORryde StepAbove Gen 2 4-step RV entry assemblyView product
STP-213MORryde StepAbove Gen 2 4-step RV entry assemblyView product
Final doorway and clearance checks
Measure at the doorframeUse the inside flange-to-flange opening specified by MORryde. A door label is a useful reference, not a replacement for physical measurement.
Check the step heightMeasure the ground-to-threshold height with the RV level. Match the height range and step rise together.
Check the entry interiorVerify clearance for the raised, stowed steps and that the latch can meet the door flange without striking trim.
Check the hingesGen 2 uses quick-release hinges. Components sold for first-generation conversions are not necessarily Gen 2 replacement parts.
Operating safety: MORryde instructs users to raise and lower these steps from outside the RV. Check the latch engagement before travel, and follow the correct Gen 2 installation manual for mounting hardware and structural support.
Related RV parts guides
Manufacturer reference: MORryde StepAbove Gen 2 product and manuals.
À propos de NewRVParts
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.
Magasiner les pièces de VR