The Jabsco 37010 electric marine toilet combines a single-button rinse pump and waste macerator beneath the bowl. Its factory exploded drawing identifies the bowl and seat, discharge valve, motor, pump internals, electrical control and installation hardware. Compare the numbered positions with the installed model before ordering a service part.
See the actual parts and assemblies
Select any photo to view its NewRVParts product listing. Complete systems and separate service parts have their own order numbers.
37010-4092 — Jabsco 37010 regular-bowl 12V electric marine toiletComplete 12V regular-bowl 37010 toilet, standard-close seat
37041-0010 — Jabsco 37010 12V motor-and-pump replacement assemblySeparate 12V pump-and-motor assembly, not a toilet
1040-0000 — Jabsco macerator pump shaft-seal service partShaft lip-seal part number shown in Jabsco 37010 and 18590 parts lists
Jabsco 37010 exploded drawing — 35 numbered positions
The original manufacturer drawing provides the component positions and service orientation.
Enlarge the original parts drawing
Open the manufacturer PDF separately to zoom in on component numbers.
Parts identified by manufacturer number
The table identifies factory components; an unlinked part number is not a separate product listing.
| Callout | Manufacturer part number | Component / identification |
|---|---|---|
| 1 | 29127-1000 / 58104-1000 | Regular seat and cover; part changes by production generation |
| 2 | 29126-0000 | Regular vitreous-china toilet bowl |
| 3 | 29098-2000 / 58105-1000 | Regular-bowl hinge kit; match production version |
| 3–4 | 58107-1000 | Bowl spud, intake elbow and O-ring set |
| 5 | Check assembly | Hose retaining clamp |
| 6 | Check installed hose | Bowl-to-pump inlet hose |
| 7 | 18753-0637 | Bowl installation hardware |
| 7A–7F | Included in hardware sets | Screws, washers, nuts and protective caps |
| 8 | 44101-1000 | Bowl-to-base O-ring |
| 9 | 37004-1000 | Toilet base assembly |
| 10 | 98023-0080 | 1-inch to 1½-inch discharge hose adapter |
| 11 | 44106-1000 | Joker valve at the discharge |
| 12 | 44107-1000 | One-inch discharge port |
| 13 | 96050-0568 | Discharge-port screws, three |
| 14 | 37056-1000 | Chopper plate with retaining nut |
| 15 | 37014-0000 | Macerator housing |
| 16 | 37006-0000 | Centrifugal impeller |
| 17 | See exact motor assembly | Impeller set screw |
| 18 | 43990-0066 | Pump/base O-ring |
| 19 | 37036-1000 | Shaft sealing sleeve |
| 20 | 91009-0096 | Motor/pump screws, two |
| 21 | 91010-0130 | Motor/pump screws, two |
| 22 | 35445-0000 | Plastic/fibre washers, two |
| 23 | 37018-0000 | Pump wearplate |
| 24 | Included with motor assembly | No. 10 stainless lock washers |
| 25 | 91027-0011 | Motor/pump mounting screws, four |
| 26 | 12558-0000 | Pump gasket |
| 27 | 6303-0003-P | Flexible pump impeller |
| 28 | 12554-0000 | Pump body |
| 29 | 1040-0000 | Shaft seal and retainer |
| 30 | 6342-0000 | Motor-shaft slinger |
| 31 | 37064-0000 / 37065-0000 | 12V and 24V bare motor options — select voltage |
| 32 | Compare original adapter | Motor-to-hose adapter |
| 33 | 37020-0000 | Push-button switch and faceplate |
| 34 | 43990-0051 | Motor cover |
| 35 | 37003-1000 | Screw-cover set |
| Complete service kit | 37040-0000 | Seals, gaskets and impeller service package |
| 12V motor/pump assembly | 37041-0010 | Motor and waste-pump service unit — sold separately |
| 24V motor/pump assembly | 37041-0011 | Different-voltage replacement; not the 12V unit |
Choose the correct replacement
Jabsco 37010-4092 is the regular-bowl, 12-volt model with a standard-closing seat. Other 37010 models use compact bowls, 24-volt motors or later soft-close seats; those parts are not automatically interchangeable. The 37041-0010 listing is the 12V motor/pump assembly, not a complete toilet. The manufacturer specifies an independent circuit and 25-amp protection for this 12V model. This raw-water rinse toilet must not be connected directly to a pressurized drinking-water system; use the manufacturer’s vented-loop and plumbing instructions.