ICON 01545
White · Brisk Air (older style)
35½ × 29½ × 12⅝ in (L × W × H)
2 front; 5 each side mounting holes · See product
ICON Dometic RV A/C Shrouds: Brisk, Penguin & HP Size Guide
A cracked or missing rooftop A/C shroud needs the right replacement shape and screw layout. Dometic's original Brisk Air, Brisk Air II, Penguin, Penguin II and HP units use different shells, even when the units have a similar cooling capacity. This guide compares ICON replacement-cover part numbers with manufacturer dimensions and mounting-hole arrangements.
Identify your Dometic air conditioner before shopping
1. Locate the A/C model labelCheck the unit's data tag. Dometic advises that an identical tag may be accessible beneath the indoor ceiling filter, in addition to the tag under the rooftop shroud.
2. Check the old shroudCompare overall length, width, height, vent openings and the number and position of fastening screws. Measurements alone cannot confirm a match if the hole pattern differs.
3. Match the exact MPNChoose the correct product family and colour. For an older, altered or previously repaired unit, compare the replacement dimensions with the original assembly.
Important distinction: Brisk Air before 2000, Brisk Air after 2000 and Brisk Air II are three separate shroud families. Original Penguin and Penguin II are also different. The 2027 ICON catalog lists the dimensions and hole layouts below, but final suitability depends on the exact A/C version.
ICON Dometic shroud MPN, dimension and mounting chart
Dimensions below are overall length × width × height. The mounting column shows hole locations on the cover, not a guarantee that the original A/C has matching fasteners.
| ICON MPN | Dometic A/C type | Colour | L × W × H | Holes | Listing |
|---|---|---|---|---|---|
| 01545 | Brisk Air (older style) | White | 35½ × 29½ × 12⅝ in | 2 front; 5 each side | View |
| 14928 | Brisk Air (older style) | Black | 35½ × 29½ × 12⅝ in | 2 front; 5 each side | View |
| 01544 | Brisk Air (newer style) | Polar White | 35½ × 29½ × 10¾ in | 2 front; 5 each side | View |
| 14927 | Brisk Air (newer style) | Black | 35½ × 29½ × 10¾ in | 2 front; 5 each side | View |
| 12272 | Brisk Air II | Polar White | 29½ × 27½ × 10¾ in | 2 front; 2 each side | View |
| 12273 | Brisk Air II | Black | 29½ × 27½ × 10¾ in | 2 front; 2 each side | View |
| 00752 | Original Penguin | Polar White | 40 × 28½ × 6½ in | 2 front; 1 each side | View |
| 01551 | Original Penguin | Black | 40 × 28½ × 6½ in | 2 front; 1 each side | View |
| 01914 | Vented original Penguin | Polar White | 40 × 28½ × 6½ in | 2 front; 1 each side | View |
| 01915 | Vented original Penguin | Black | 40 × 28½ × 6½ in | 2 front; 1 each side | View |
| 12274 | Penguin II | Polar White | 42 × 29 × 7½ in | 2 front; 2 each side | View |
| 12275 | Penguin II | Black | 42 × 29 × 7½ in | 2 front; 2 each side | View |
| 12276 | Dometic HP | Polar White | 39½ × 29¾ × 10¾ in | 2 front; 3 each side | View |
| 12277 | Dometic HP | Black | 39½ × 29¾ × 10¾ in | 2 front; 3 each side | View |
How similar can two covers be?
ICON lists both old and newer Brisk Air covers as 35½ × 29½ inches in length and width, but their heights are 12⅝ and 10¾ inches respectively.
Why fastener positions matter
The Brisk II group has two front and two side holes per side; the older Brisk styles have two front and five per side. A near-size match is not enough.
Shop ICON shrouds by Dometic A/C family
Each product card links to the exact MPN in our catalog. Use the photos to compare general shape and finish, then confirm the listed dimensions and fastening pattern.
Older Brisk Air
ICON separates older Brisk Air units (generally manufactured before 2000) from the later Brisk Air profile. The older cover is taller despite a similar length and width.
ICON 14928
Black · Brisk Air (older style)
35½ × 29½ × 12⅝ in (L × W × H)
2 front; 5 each side mounting holes · See product
Later Brisk Air
For ICON's newer Brisk Air shroud family, verify the lower cover height and original fastener layout. Do not choose by colour or cooling capacity alone.
ICON 01544
Polar White · Brisk Air (newer style)
35½ × 29½ × 10¾ in (L × W × H)
2 front; 5 each side mounting holes · See product
ICON 14927
Black · Brisk Air (newer style)
35½ × 29½ × 10¾ in (L × W × H)
2 front; 5 each side mounting holes · See product
Brisk Air II
Brisk II uses a noticeably smaller shell and fewer side mounting holes than the first-generation Brisk Air styles.
ICON 12272
Polar White · Brisk Air II
29½ × 27½ × 10¾ in (L × W × H)
2 front; 2 each side mounting holes · See product
ICON 12273
Black · Brisk Air II
29½ × 27½ × 10¾ in (L × W × H)
2 front; 2 each side mounting holes · See product
Original Penguin
The original Penguin is a low rooftop profile; its 00752 and 01551 covers use a different shell than Penguin II.
ICON 00752
Polar White · Original Penguin
40 × 28½ × 6½ in (L × W × H)
2 front; 1 each side mounting holes · See product
ICON 01551
Black · Original Penguin
40 × 28½ × 6½ in (L × W × H)
2 front; 1 each side mounting holes · See product
Original Penguin with side venting
These original-Penguin covers have venting on the left side. Compare the original side openings as well as the mounting positions.
ICON 01914
Polar White · Vented original Penguin
40 × 28½ × 6½ in (L × W × H)
2 front; 1 each side mounting holes · See product
ICON 01915
Black · Vented original Penguin
40 × 28½ × 6½ in (L × W × H)
2 front; 1 each side mounting holes · See product
Penguin II
The updated Penguin II shell is longer and wider than the original Penguin cover, with a different side mounting-hole count.
ICON 12274
Polar White · Penguin II
42 × 29 × 7½ in (L × W × H)
2 front; 2 each side mounting holes · See product
ICON 12275
Black · Penguin II
42 × 29 × 7½ in (L × W × H)
2 front; 2 each side mounting holes · See product
Dometic HP Series
Dometic HP has its own shell outline and fastening arrangement. It is not a substitute for a Brisk or Penguin cover simply because measurements seem close.
ICON 12276
Polar White · Dometic HP
39½ × 29¾ × 10¾ in (L × W × H)
2 front; 3 each side mounting holes · See product
ICON 12277
Black · Dometic HP
39½ × 29¾ × 10¾ in (L × W × H)
2 front; 3 each side mounting holes · See product
Common replacement-shroud questions
Can I install a Brisk II shroud on an older Brisk Air unit?
Not based on the series name alone. ICON lists the Brisk II shell as 29½ × 27½ × 10¾ inches, while the two original Brisk styles are 35½ × 29½ inches and have more side fasteners. Compare the exact rooftop model and hardware first.
Are the original Penguin and Penguin II covers interchangeable?
The manufacturer lists a 40 × 28½ × 6½-inch original Penguin shell and a 42 × 29 × 7½-inch Penguin II shell, with different mounting patterns. Treat them as separate families.
Does BTU capacity tell me which shroud fits?
No. Several rooftop A/C families are offered with similar cooling ratings but use different housings. Identify the actual manufacturer model and the cover's attachment pattern.
Continue to the matching A/C parts diagrams
For your air conditioner's model-specific component diagrams, use the Dometic rooftop A/C parts finder, the combined RV air-conditioner diagram index, the Brisk Air 57915531 reference, or the Penguin II 640315C851 parts guide.
Manufacturer information: ICON RV Parts Catalog, A/C shrouds pp. 125–126 (PDF); Dometic model-label identification. Disconnect all power and follow the A/C maker's removal and installation instructions before handling rooftop equipment.
À propos de NewRVParts
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.
Magasiner les pièces de VR