Building a Go Power PowerTrak display system? The 84025 kit and 83457 display-only unit look similar but include different hardware. This guide helps identify the correct package, explains the RV-C network parts, and links to related inverter/charger and solar equipment carried in our catalog.
Illustrated RV-C component map
The display collects data from compatible RV-C devices. An AIC inverter/charger can report operation, an RV-C solar controller can report charging, and a compatible battery interface provides battery information. Matching the communication system matters as much as the screen size.
GP-PT-DIS-KIT 84025 or GP-PT-DIS-3 83457?
For a new system, start with the complete GP-PT-DIS-KIT (84025); for an existing installation with the correct RV-C harness and terminator, the GP-PT-DIS-3 (83457) may be sufficient. Neither package automatically includes the GP-SHUNT-500 battery shunt.
| Part / MPN | Package contents | Best use |
|---|---|---|
| GP-PT-DIS-KIT / 84025 | GP-PT-DIS-3 touchscreen; GP-RVC-EXT-25 25-ft RV-C harness; GP-RVC-PT-TR terminator; display connectivity cables | Starting a new PowerTrak display installation |
| GP-PT-DIS-3 / 83457 | 3.2-inch touchscreen only; RV-C harness and terminator not included | Replacing a screen or adding a display to a properly wired network |
| GP-SHUNT-500 | PowerTrak RV-C smart shunt; separate accessory not included with either screen | Battery state-of-charge reporting for AGM, flooded and other non-Advanced-Lithium batteries |
| GP-BMK-25 / 82958 | Dedicated standalone monitor with its own shunt and separate wired display | Independent battery monitor, not an RV-C PowerTrak component |
Display size and mounting
Both display packages use a 3.2-inch 320 × 240 colour touchscreen. Go Power specifies a display bezel measuring 4.75 × 2.75 × 0.75 inches and a panel cutout of 4.375 × 2.375 inches. The display runs from a compatible 12–48V RV-C network, with Bluetooth access through the Go Power Connect app.
Battery monitoring: which information is available?
Go Power Advanced Lithium batteries provide battery data over their supported communication harness. For AGM, flooded, gel or other lithium systems, PowerTrak needs an appropriate GP-SHUNT-500 battery monitoring interface for state-of-charge readings. A PowerTrak screen alone cannot measure battery current just by being installed.
The older GP-BMK-25 (82958) is a separate monitor with its own display and 500A/50mV shunt. It is not an adapter for displaying battery information on PowerTrak.
Browse the exact PowerTrak and compatible products
PowerTrak touchscreen choices
Other equipment in the reference
Standalone battery monitor — a different system
Original Go Power documentation
Go Power's manufacturer reference page provides the display and network specifications, with product documentation available there. Use those drawings to select the actual branch and termination harnesses for your RV.
PowerTrak display kit specifications and manufacturer documents