Go Power FBL-200, FBL-300 & FBL-400 Class T Fuse Kit Guide

Go Power! FBL-200, FBL-300 and FBL-400 are complete Class T fuse-and-holder kits for the DC battery supply to a compatible RV inverter or inverter/charger. Each kit comes with its own amperage-rated Class T fuse, an insulated block, a transparent cover and mounting hardware. For an existing holder, a replacement fuse is a separate part. Compare the exact kit and fuse numbers below before choosing protection for your inverter.

Where Class T fuse protection sits in the DC system

Protected positive cable

Battery positive (+)12V, 24V, 32V or 48V system as approved for the inverter
Go Power FBL Class T fuse kitSelect the fuse amperage required for the actual battery, cable and inverter installation
Inverter DC positive (+)Feeds the connected inverter or inverter/charger

Separate negative return

Inverter DC negative (−)Separate DC return cable; not routed through the positive fuse
Required shunt or DC return hardwareOnly where specified by the actual system's manufacturer
Battery negative (−)Keep connections consistent with the inverter and battery manuals
Original functional illustration, not a terminal map, wiring schematic, fuse-size recommendation or installation plan. Follow the inverter and battery manufacturers' protection and conductor requirements.

FBL-200 versus FBL-300 versus FBL-400

FBL-200 · 44226200A Class T kit
Supplied with F-200 fuse
FBL-300 · 44227300A Class T kit
Supplied with F-300 fuse
FBL-400 · 43979400A Class T kit
Supplied with F-400 fuse
Go Power model Supplier part Included protection Separate replacement fuse
FBL-200 44226 200A Class T, block and cover F-200 (44365)
FBL-300 44227 300A Class T, block and cover F-300 (44366)
FBL-400 43979 400A Class T, block and cover F-400 model; confirm separately for availability

Go Power lists one block size across these FBL ratings, a #6 to 4/0 AWG cable accommodation range and 5/16-inch mounting studs. The factory also lists compatibility with appropriately designed 12V, 24V, 32V and 48V battery systems. The kit supplies the fuse holder, fuse, cover and mounting hardware; battery cables are not included.

Do not select a fuse by inverter wattage alone. The correct Class T rating depends on the inverter's actual DC input specification, battery system and installed conductor protection. A holder that accepts multiple fuse ratings does not make them electrically interchangeable.

Exact-number Class T fuse kits and replacement fuses

These are NewRVParts listings for the three complete kits and two separately offered replacement fuse ratings. Open the exact part for current pricing and supplier-warehouse availability.

Go Power FBL-200 200A Class T fuse block kit listed product image
FBL-200 — 200A Class T fuse block kitIncludes a 200A F-200 Class T fuse, block base, clear cover and mounting hardware.View exact part and availability
Go Power FBL-300 300A Class T fuse block kit listed product image
FBL-300 — 300A Class T fuse block kitIncludes a 300A F-300 Class T fuse, block base, clear cover and mounting hardware.View exact part and availability
Go Power FBL-400 400A Class T fuse block kit listed product image
FBL-400 — 400A Class T fuse block kitIncludes a 400A F-400 Class T fuse, block base, clear cover and mounting hardware.View exact part and availability
Go Power F-200 200A Class T replacement fuse listed product image
F-200 — 200A Class T replacement fuseFuse only, not the holder; replacement rating for an appropriately specified 200A circuit.View exact part and availability
Go Power F-300 300A Class T replacement fuse listed product image
F-300 — 300A Class T replacement fuseFuse only, not the block; match the exact 300A protection requirement.View exact part and availability

Go Power installation and selection reference

The Go Power inverter fuse-and-block documentation lists the FBL kit configurations, Class T replacement fuse models, stud sizes and supported DC battery-system voltages. Refer to the inverter's installation manual for the required fuse location and cable size, rather than relying on a general parts guide.

Electrical safety: Battery-bank circuits can deliver dangerous fault current. Disconnect and isolate all DC and charging sources before service. Have fuse location, interrupt rating, conductor protection and connections confirmed by a qualified RV electrical technician.

Bulletin des pièces de VR

Inscrivez-vous pour nos prochaines promotions !

À propos de NewRVParts

NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.

Magasiner les pièces de VR