
Valterra T1001 — 1½ in
Standard 1½-inch fixed hub-to-spigot valve, not two hubs.
View exact part T1001A waste valve can have the right nominal diameter and still be the wrong replacement. The hub, spigot, outlet bayonet, handle and cable arrangement all affect how it joins the existing RV drain. Compare these Valterra part numbers by connection style, not just by their 1½-inch, 2-inch or 3-inch designation.
Check the original handle and both ends. T40 is a 3-inch hub-to-spigot valve; T40B has two hubs and T40A two spigots. T1001 is a 1½-inch valve, while T1002B has 2-inch hubs.
Some RVs put the actual valve behind a panel or under a floor. H40H72 and H40H96 are 3-inch hub-to-spigot cable-operated valves with different cable lengths. TC172 and TC372 are valve kits with 72-inch stainless-core cables.
This is a connection-type explanation, not a dimensioned fitting drawing. Valterra states that its 1½-inch waste-valve hub fittings also act as 2-inch spigots; verify actual mating fittings rather than assuming nominal labels indicate interchangeability.
| Part number | Type | Nominal size | Connections and operation |
|---|---|---|---|
| T1001 | Manual | 1½ in | Hub × spigot Pull handle |
| T1002B | Manual | 2 in | Hub × hub Pull handle |
| T40 | Manual | 3 in | Hub × spigot Pull handle |
| T40B | Manual | 3 in | Hub × hub Pull handle |
| T40A | Manual | 3 in | Spigot × spigot Pull handle |
| T50 | Manual, capped outlet | 3 in | Hub × bayonet-cap outlet Pull handle |
| T1001PBC | Valve body only | 1½ in | Replacement body / coupler No pull handle or cable |
| T1003PBC | Valve body only | 3 in | Replacement body / coupler No pull handle or cable |
| T40H | Cable-ready valve only | 3 in | Hub × spigot Cable not included |
| H40H72 | Cable valve | 3 in | Hub × spigot 72 in pre-attached cable |
| H40H96 | Cable valve | 3 in | Hub × spigot 96 in pre-attached cable |
| TC172 | Cable valve kit | 1½ in | Valve body / cable kit 72 in stainless inner wire |
| TC172CN | Cable valve kit | 1½ in | Valve body / cable kit 72 in polymer extension |
| TC372 | Cable valve kit | 3 in | Valve body / cable kit 72 in stainless inner wire |
| TC372CN | Cable valve kit | 3 in | Valve body / cable kit 72 in polymer extension |
| T58 | Twist-on add-on valve | 3 in | Outlet bayonet twist-on Pull handle + locking clip |
Inspect the size on the current assembly, the visible hub or spigot ends, its position in the plumbing, the space needed to pull the handle and whether the old valve is part of a more complex wye, tee or rotating manifold. The straight valve models here are not universal substitutes for integrated rotating drain assemblies. Drain and flush the holding system and follow the manufacturer procedure before removing a waste-line component.
For a body replacement, check bolt pattern, body thickness and seal arrangement; a replacement valve body is not necessarily supplied with a handle or flexible control. Do not rely on a similar bolt pattern to establish compatibility with every waste-valve brand or generation.
Each card links to the matching NewRVParts product listing and its associated catalog image. Select the part number and connection configuration first; use the product listing for exact contents and ordering information.

Standard 1½-inch fixed hub-to-spigot valve, not two hubs.
View exact part T1001
Two fixed 2-inch hub connections; not the same as the 3-inch T40B.
View exact part T1002B



Outlet includes the bayonet-cap configuration rather than a second glue-in hub.
View exact part T50
Body kit includes coupler, seals and mounting hardware; verify actuator.
View exact part T1001PBC
Body, cable coupler, seals and hardware; requires matched existing operating control.
View exact part T1003PBC

Six-foot remote cable version of the specified hub/spigot valve.
View exact part H40H72
Eight-foot remote cable version; check mounting and cable path.
View exact part H40H96
One-and-a-half-inch valve with stainless inner-wire control and folding handle.
View exact part TC172
One-and-a-half-inch valve with high-density polymer cable and handle.
View exact part TC172CN
Three-inch valve kit with remote 72-inch stainless-wire control.
View exact part TC372
Three-inch valve kit with high-density polymer cable and handle.
View exact part TC372CN
Attaches to compatible existing bayonet outlet rather than replacing an in-line valve.
View exact part T58No. T40 has a hub at one end and a spigot at the other, while T40B has hubs at both ends. Your existing pipe and fittings determine what connection layout is required.
It provides an additional shutoff at a compatible existing bayonet sewer outlet. It does not directly replace or repair the valve inside the original waste assembly.
Both are 3-inch valve kits with 72-inch controls, but TC372 is the stainless inner-wire version and TC372CN uses a high-density polymer extension cable.
No. It is a 3-inch valve-body kit with coupler, seals and hardware. The correct actuator and any control cable must be matched separately.
No. The valve may be part of a fixed, rotating, tee, wye or double-valve assembly. Confirm the full original assembly and both pipe connections.
NewRVParts supplies new parts from warehouses; on-site viewing and pickup are not available. Before servicing a waste system, isolate the drain and follow appropriate sanitation procedures.
Quick product links: T1001 · T1002B · T40 · T40B · T40A · T50 · T1001PBC · T1003PBC · T40H · H40H72 · H40H96 · TC172 · TC172CN · TC372 · TC372CN · T58
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.
Magasiner les pièces de VR