The F2020 tie-down set provides two removable front anchor points for selected Ford F-150 SuperCrew pickups with the 5.5-foot bed. Its steel frame receivers attach at factory mounting locations and accept inserts that can be removed between camping trips.
See the F2020 tie-down pair
These photos are taken from the NewRVParts listing for the exact F2020 kit. Select a photo to view the product details.
Front tie-down assembly and included pieces
The front kit has a frame receiver on each side and a removable insert at each location. The following is a component identification guide, not a substitute for the factory's vehicle-specific installation drawing.
| Component | Quantity | Purpose |
|---|---|---|
| Left front frame-mounted bracket / receiver | 1 | Bolts to the prescribed driver-side truck frame location |
| Right front frame-mounted bracket / receiver | 1 | Bolts to the corresponding passenger-side frame location |
| Removable steel tie-down inserts | 2 | Slide into the fixed receivers to provide camper attachment points |
| Retaining pins and clips | 2 sets | Secure the removable inserts in their receivers |
| Vehicle-specific installation hardware | Supplied kit | Bolts, nuts, washers and spacers as specified for the exact vehicle kit |
| Original fitting instructions | Supplied kit | Manufacturer illustrations, fastener arrangement and torque procedure |
How the camper is secured
Connection path for identification only; brackets, clearances and routing depend on the exact truck.
Why the F2020 and F2019 are different
- TorkLift lists F2020 for eligible 2015–2026 Ford F-150 SuperCrew 5.5-foot-bed trucks with fixed, non-electric cab-length running boards.
- For an otherwise eligible F-150 with no running boards or cab-length electric boards, TorkLift directs customers to F2019 instead; these front kits are not interchangeable merely because the truck year matches.
- Confirm the exact model year, bed, factory boards, frame and optional accessories in TorkLift's fit finder before choosing either kit.
Mounting and inspection
The maker's F2020 assembly attaches to the cab/front body mount outrigger area using the vehicle's existing holes and supplied vehicle-specific hardware. Align the left and right frame receivers before final tightening, then secure each removable insert with its retaining pin and clip.
Complete the camper tie-down system
Front brackets alone do not secure all four camper corners. These separately listed products may be useful after selecting the correct rear brackets and measuring the required turnbuckle range.
S9700 — TorkLift removable tie-down insert lock setFour keyed-alike locks for suitable TorkLift receiver inserts; not included
S9522 — TorkLift Original FastGun long turnbuckles, pairTwo long-range spring-loaded turnbuckles, 25–43 inches; sold separately
S9000 — TorkLift Basic SpringLoad kitSpring-loaded turnbuckle components for two tie-down connections; sold separately
Manufacturer fitting instructions
TorkLift provides original application, mounting and service information for this part. Use the exact printed instruction sheet shipped with the kit for its mounting diagrams, bolt placement and torque values.
View the TorkLift F2020 manufacturer information · F2019 versus F2020 running-board explanation