
Sea-Dog 520500-1
Nylon scupper flapper valve
Surface-mounted nylon flapper with four #6 flat-head fastener holes. Fasteners are not included. Also used as a replacement valve in the Sea-Dog 520510 thru-hull scupper assembly.
Sea-Dog supplies above-waterline thru-hull fittings in several hose sizes, plus a separate flap-style scupper valve for self-bailing cockpits. This comparison helps distinguish the 520500-1 flap component from 520750-1, 520770-1 and 520790-1 white polypropylene outlets before measuring or drilling the hull.
520500-1 uses a soft black flap to resist backwash. This is the replacement valve for Sea-Dog's 520510 scupper thru-hull, not a complete assembly.
520750-1 is white polypropylene with a 1-13/16-inch A dimension and 3-1/2-inch overall D length.
520770-1 has a 2-3/16-inch A dimension and 3-9/16-inch overall D length.
520790-1 is the larger white thru-hull, with 2-7/8-inch A and 4-3/16-inch overall D.
The A, B and D labels come from Sea-Dog's individual dimensioned product drawings. A describes the outward flange dimension for these products; verify the drawing before treating any measurement as a hole-cutout dimension.
| Sea-Dog MPN | Component | Hose size | Drawing dimension A | Drawing B or D |
|---|---|---|---|---|
| 520500-1 | Nylon scupper flapper valve | Not a hose fitting | A: 2-13/16 in | B: 1-7/8 in |
| 520750-1 | White polypropylene thru-hull | 3/4 in | A: 1-13/16 in | D: 3-1/2 in |
| 520770-1 | White polypropylene thru-hull | 1-1/8 to 1-1/4 in | A: 2-3/16 in | D: 3-9/16 in |
| 520790-1 | White polypropylene thru-hull | 1-1/2 in | A: 2-7/8 in | D: 4-3/16 in |
Sea-Dog lists these polypropylene thru-hulls for drainage above the water line, and the scupper flap for self-bailing cockpits. Do not use them in place of an approved below-waterline seacock or shutoff assembly. The 520500-1 flap is a standalone valve component and replacement part for 520510.
The four linked listings below correspond to the specific MPNs in the comparison. Verify the actual drain configuration before ordering.

Nylon scupper flapper valve
Surface-mounted nylon flapper with four #6 flat-head fastener holes. Fasteners are not included. Also used as a replacement valve in the Sea-Dog 520510 thru-hull scupper assembly.

White polypropylene thru-hull
White injection-molded polypropylene thru-hull for above-waterline hose-connected drainage. The listed F dimension is 3/4 inch.

White polypropylene thru-hull
Larger white molded thru-hull with a manufacturer-listed F hose range of 1-1/8 to 1-1/4 inches, for drainage above the waterline.

White polypropylene thru-hull
White polypropylene 1-1/2-inch hose thru-hull. The listed overall D length and flange A dimension are greater than the smaller models.
Sea-Dog drain plugs and garboard fitting sizes • Sea-Dog tank vent selection by material
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.
Magasiner les pièces de VR