Choosing a new RV fender skirt starts with the original skirt's axle layout, exact outline and measurements, not simply the trailer brand. ICON uses FS design numbers to identify shapes. This guide compares single-, tandem- and triple-axle examples and links each part to its product listing.
Measure your original fender skirt
Simplified illustration for orientation; not a scaled profile or hole-location drawing.
- Count the wheel openings and record whether the old skirt is a one-, two- or three-axle style.
- Measure full length (F) and overall height (C) at their widest points.
- Record mounting-hole centres (A), wheel-well rise (B), outside leg (D) and centre leg (E) where applicable.
- Compare the complete outline, leg ends, colour and exact ICON part number. Similar dimensions do not prove that mounting holes line up.
For the full set of measurement positions, refer to ICON's fender skirt measurement sheet (PDF).
Different RVs can share a similar skirt length but have different wheel-arch curves, fastening points or leg ends. Use dimensions to shortlist, then compare the whole shape.
ICON replacement fender skirt comparison chart
The measurements below match the listed ICON FS designs. The two dimensions are overall length and height, not an axle spacing or cut-out measurement.
| ICON part / design | Axles | Length (F) | Height (C) | Colour |
|---|---|---|---|---|
| 01738FS1738 | Single | 42-1/4 in | 18-3/4 in | Polar White |
| 12558FS2558 | Single | 33-1/2 in | 18 in | Polar White |
| 14519FS4405 | Single | 36-1/4 in | 17-3/8 in | Polar White |
| 01424FS700 | Tandem | 65-5/8 in | 10-1/4 in | Polar White |
| 01770FS1770 | Tandem | 69-3/8 in | 9-1/2 in | Polar White |
| 12322FS2322 | Tandem | 72-5/8 in | 10-1/4 in | Black |
| 14895FS4527 | Tandem | 71-5/8 in | 10-1/2 in | Black |
| 14955FS4733 | Tandem | 81-1/4 in | 12-1/2 in | Black |
| 15043FS5012 | Tandem | 77 in | 12-3/4 in | Black |
| 15158FS5158 | Tandem | 68-1/8 in | 12 in | Black |
| 14675FS4675 | Triple | 115-1/4 in | 16-1/4 in | Black |
All dimensions are inches. Compare the original holes, contour and leg design in addition to these overall measurements.
Compare product photos and availability
Select an exact ICON part to see its full product listing and current online availability.
Single-axle fender skirts
One wheel opening; check end-leg shape and top-hole placement.



Tandem-axle fender skirts
Two wheel openings; compare centre and outside legs as well as dimensions.







Triple-axle fender skirts
Three wheel openings; inspect the full panel profile and supplied sections.

