RV Designer Entry Door Holders: T-Style, 45° & 90°

An RV entry-door holder helps keep the exterior door open when it is engaged. RV Designer's stainless models include 4- and 6-inch straight T-style holders as well as 45° and 90° angled styles. Choosing the correct geometry is more important than choosing a similar-looking stainless piece.

Two different attachment styles

Straight T-style: E224 / E226

These self-closing stainless holders have the familiar T-style engagement. E224 is the 4-inch model; E226 is the 6-inch model. Compare the needed reach and mounting clearance.

Angled: E275 / E277

E275 is the manufacturer's 45° angled stainless holder; E277 is the 90° version. The angle describes the fitting geometry, not a guarantee that a door will open to that same angle.

RV Designer stainless door holder comparison

RV Designer MPN Holder style Length or angle Construction and action
E224 Straight T-style 4 in Stainless steel · Spring-loaded self-closing action
E226 Straight T-style 6 in Stainless steel · Spring-loaded self-closing action
E275 Angled holder 45° Stainless steel · Stainless steel, angled self-closing form
E277 Angled holder 90° Stainless steel · Stainless steel, angled self-closing form

What to measure before replacing a door holder

  1. Identify whether the original has a straight T-style arm or an angled fitting, then look for the manufacturer's part number.
  2. For a straight holder, distinguish the 4-inch E224 from the 6-inch E226; the correct reach depends on the mounting positions.
  3. For an angled holder, select the documented 45° E275 or 90° E277 geometry based on the original fitting and available clearance.
  4. Compare mounting-hole spacing on the RV wall and door before drilling new holes. Check for suitable backing and seal exterior penetrations correctly.
  5. After fitting, confirm the door can be secured open and then released without bending the holder or interfering with other exterior accessories.
A stainless finish alone does not establish compatibility. Compare both mating pieces, the mounting pattern, the required reach and the door-to-wall angle before ordering.

Compare the four matching door holders

Choose the original manufacturer part number for current availability and product details.

For a separate part of the entry, see our RV Designer screen-door latch comparison. It explains the differences between Amerimax and Phillips latch designs and their left- and right-hand variants.

Bulletin des pièces de VR

Inscrivez-vous pour nos prochaines promotions !

À propos de NewRVParts

NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.

Magasiner les pièces de VR