
156-75 — Motorhome charge-line kit
Adds a protected charging circuit at the towing vehicle. Requires a correctly wired charge circuit on the towed vehicle and a suitable multi-wire connection.
View Roadmaster 156-75A towed vehicle with a low battery and a towed vehicle that must have its battery disconnected are two different situations. Roadmaster makes separate products for these jobs: 156-75 supplies a charge circuit on the motorhome side, while 767 is a manual starting-battery disconnect for the vehicle where it is fitted. Neither part replaces the other.
Use an appropriately wired charging circuit. Roadmaster 156-75 supplies the motorhome end, up to 15 amps. The towed car also needs its own charge-line wiring, such as Roadmaster 156-25 where required, and a suitable connecting cord and sockets.
Use a disconnect only where the vehicle manufacturer permits or requires battery disconnection. Roadmaster 767 is manually operated, works on 12-volt starting batteries and is rated for heavy-duty cranking loads.
The pathway below describes the roles of the components; it is not a terminal-by-terminal wiring diagram.
The 156-75 kit includes 12-gauge wire, split loom, installation hardware and a self-resetting thermal breaker. Roadmaster specifies a charge circuit on both vehicles and the correct socket/cord arrangement; a motorhome-only kit will not charge an unwired towed vehicle.
| Detail | 156-75 | 767 |
|---|---|---|
| Purpose | Motorhome charge-line kit | Manual battery-isolation switch |
| Electrical function | Up to 15A charging supply when both ends are correctly installed | 300A continuous duty; 1,000A surge switching rating |
| Location and operation | Installs in the towing vehicle; works with the cord and towed-side charge circuit | Installs in the vehicle needing battery disconnection; turned manually |
| Before purchase | Check for an existing factory charge circuit, cord and towed-vehicle wiring | Verify manufacturer-approved battery-disconnect procedure; one switch isolates one starting battery |
These are two distinct products, not two versions of the same kit. Product photos and links lead to the exact NewRVParts listings.

Adds a protected charging circuit at the towing vehicle. Requires a correctly wired charge circuit on the towed vehicle and a suitable multi-wire connection.
View Roadmaster 156-75
Lets the operator isolate one vehicle starting battery when its towing instructions require disconnection. It does not send charging current.
View Roadmaster 767No. It installs the motorhome charge supply. Roadmaster also requires an appropriate towed-vehicle charge circuit and the connected sockets/power cord; its 156-25 is the corresponding towed-car kit when a factory charge line is absent.
No. It is a manual disconnect intended to isolate a battery circuit, not supply a maintenance charge.
No. Roadmaster specifies 300 amps continuous duty and 1,000 amps surge. These values describe different operating conditions.
No. Follow the vehicle manufacturer's towing sequence and Roadmaster's instructions. Never operate a starting-battery disconnect contrary to the prescribed procedure.
For the exact electrical layout and installation sequence, consult the instructions supplied with each Roadmaster kit and the vehicle owner's manual. NewRVParts ships products from supplier warehouses; in-person viewing or pickup is not available.
Quick product links: Roadmaster 156-75 · Roadmaster 767
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.
Magasiner les pièces de VR