Go Power TS-30 (64403), GP-TS and TS-50M (70278) are automatic AC transfer switches for different RV electrical arrangements. Use the illustrated source-selection guides, exact manufacturer model ratings and linked product photos to identify the correct series before considering installation.
How the two power-source arrangements differ
A transfer switch selects between two AC supply sources. The diagrams below show the role of the inputs and the RV distribution panel. They are identification aids, not terminal wiring diagrams.
30A / 120V: TS-30 or GP-TS
50A / 120–240V: TS-50M
Exact model comparison
The TS-30 is the hardwire version. The GP-TS adds a prewired inverter plug and a receptacle intended to power the converter when shore power is present, helping avoid an inverter-to-converter charging loop. The TS-50M serves two-leg 50A systems and has a metal enclosure and selectable generator delay.
| Model / part no. | Rated AC service | Configuration | Dimensions (L × W × H) |
|---|---|---|---|
| TS-30 / 64403 | 30 A; 120 V AC, one leg | Hardwired two-input switch | 9.65 × 7.28 × 4.75 in |
| GP-TS / GP-TS | 30 A; 120 V AC, one leg | Prewired transfer switch | 9.65 × 7.28 × 4.75 in |
| TS-50M / 70278 | 50 A; 120/240 V AC, two legs | Double-pole transfer switch | 9.4 × 7 × 4.4 in |
Key differences inside the units
TS-30: A 30A relay, source-selection controls and hardwired AC connections inside the enclosure. GP-TS: The same 30A electrical service class with an attached inverter connection and converter-only-when-shore-powered receptacle. TS-50M: A double-pole switching arrangement for two 120V legs, with the source terminal groups shown in the original factory drawing.
These switches provide source transfer and back-feed isolation as designed. They should not be described as solar-to-battery transfer devices or treated as surge-protection units without an exact manufacturer specification.
Shop exact-number transfer switches
Choose the complete manufacturer model, then check the product page for photos, product information and current availability.



Already using an inverter with an internal transfer switch?
Go Power's ASW-3000-12-TS (83829) 3,000W inverter includes its own 30A transfer function. It is shown as a different system choice, not as a replacement ATS and not as a guaranteed fit for an existing installation.

Original manufacturer drawings and service manuals
The Go Power manuals include the real relay and terminal drawings. Use these documents with the model label and current instructions; the simplified illustrations above intentionally omit electrical terminals and conductor routing.
