CURT 28202
A-frame · Topwind
2,000 lb lift / 3,000 lb support, 15 in travel.
A-frame topwind jack for compatible bolt-on or weld-on A-frame installations; mounting hardware is not included.
CURT Trailer Jacks: A-Frame vs Swivel, Lift & Support Ratings
The correct trailer jack depends on more than the large capacity number in its product name. CURT specifies separate lifting and supporting capacities, as well as vertical travel and mounting style. These six jacks cover fixed A-frame installations and swing-away pipe-mounted designs with topwind or sidewind handles.
Before buying: match the jack to the trailer
Fixed A-frame or swivelling pipe mountA-frame models mount through the trailer tongue and retract in place. Pipe-mount swivel jacks require the correct weld-on receiver tube and can rotate out of the way for travel.
Lift capacity versus support capacityThe lifting limit governs actively raising the trailer tongue. The higher support number on some models applies while supporting a static load. Neither rating changes the trailer's allowable weight.
Handle clearance and travelChoose topwind or sidewind according to access around the trailer frame and coupler. Check retracted height, foot and ground clearance along with the listed travel distance.
Do not select solely by the highest printed rating. For example, CURT 28250 and 28354 carry 5,000-lb support ratings but only 3,000-lb lift ratings. Confirm the original jack mount, installation method and actual loaded tongue weight before ordering.
CURT jack ratings and mounting comparison
The figures below come from each exact CURT model's published specifications. A-frame and pipe-mount swivel designs are distinct installations; a handle style or matching capacity does not establish interchangeability.
| MPN | Mount | Wind | Lift | Support | Travel | Product |
|---|---|---|---|---|---|---|
| 28202 | A-frame | Topwind | 2,000 lb | 3,000 lb | 15 in | View |
| 28204 | A-frame | Sidewind | 2,000 lb | 3,000 lb | 14½ in | View |
| 28250 | A-frame | Topwind | 3,000 lb | 5,000 lb | 14 in | View |
| 28320 | Pipe-mount swivel | Topwind | 2,000 lb | 3,000 lb | 10 in | View |
| 28354 | Pipe-mount swivel | Sidewind | 3,000 lb | 5,000 lb | 10 in | View |
| 28356 | Pipe-mount swivel | Topwind | 3,000 lb | 5,000 lb | 15 in | View |
Compare available CURT jacks
Each card opens the exact NewRVParts listing. Confirm the model number and frame mounting dimensions, especially when changing from a fixed jack to a swing-away type.
CURT 28204
A-frame · Sidewind
2,000 lb lift / 3,000 lb support, 14½ in travel.
Side-mounted crank handle with a 14½-inch stroke, for appropriate A-frame trailer tongues.
CURT 28250
A-frame · Topwind
3,000 lb lift / 5,000 lb support, 14 in travel.
Higher support rating than the 2,000-lb lift models, while the rated lifting capacity is 3,000 lb.
CURT 28320
Pipe-mount swivel · Topwind
2,000 lb lift / 3,000 lb support, 10 in travel.
Weld-on pipe mounting bracket with a pull-pin swivel to raise the jack for towing.
CURT 28354
Pipe-mount swivel · Sidewind
3,000 lb lift / 5,000 lb support, 10 in travel.
Swivelling sidewind jack for an appropriate welded pipe mount; do not substitute an A-frame mounting plate.
CURT 28356
Pipe-mount swivel · Topwind
3,000 lb lift / 5,000 lb support, 15 in travel.
Longer-travel swivelling topwind version of the 5,000-lb support class.
Trailer jack questions
Is a 5,000-lb support jack rated to lift 5,000 lb?
Not necessarily. The 28250, 28354 and 28356 models in this comparison are rated for 3,000 lb lift and 5,000 lb static support. Use the lower lift rating when raising the trailer tongue.
What is the difference between 28202 and 28204?
Both are A-frame jacks with 2,000-lb lifting and 3,000-lb support ratings. The 28202 is topwind with 15 inches of travel; 28204 is sidewind with 14½ inches.
Can I bolt a pipe-mount swivel jack into an A-frame jack opening?
No direct replacement is established. Pipe-mount models use a dedicated welded pipe bracket and pull-pin swivel mechanism. Check the correct bracket, installation instructions and frame structure.
Will a topwind jack work where a sidewind jack used to be?
Only when the mounting, operating clearance, retracted height, stroke and load requirements all suit the replacement. Handle position alone is not sufficient.
Do these models include a caster wheel?
The selected configurations are jack models without a caster wheel. Confirm the exact foot and any optional wheel's rating and tube size before adding an accessory.
More CURT jack service parts
Need a crank, foot or caster instead of the complete jack? See CURT Trailer Jack Parts: Feet, Casters, Mounts & Cranks for more component identification.
Always support and chock the trailer safely during installation, and follow CURT's mounting and maintenance instructions for the chosen jack.
À propos de NewRVParts
NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.
Magasiner les pièces de VR