Blue Sea Add-A-Battery kits use two different components to manage a start battery and a second battery bank: a manual Dual Circuit Plus switch to control the start and house load circuits, and an automatic charging relay (ACR) that can connect the banks when charging is available. The part numbers matter because the smaller 7649 and the 120A 7650/7650003 kits use different switches and relays.

Start and house circuits: a simple system overview

In a typical dual-bank setup the start side supplies the engine starting circuit and the house side supplies accessories. The manual switch keeps those circuits separately controlled in ON; the relay is a second connection between the battery positives and operates automatically. It is important not to confuse the switch's emergency COMBINE function with the ACR's normal charging behaviour.

Start battery Positive battery terminal
Switch — start circuit One of two independently switched circuits
Engine starting / start loads
House battery Positive battery terminal
Switch — house circuit Other switched circuit
Fused accessory / house loads
ACR — automatic connection between the battery positivesCloses when it detects suitable charging voltage; opens when isolation conditions are met. This path is separate from the switch's normal output paths.
OFF

The manual switch disconnects its two switched load circuits.

ON

Engine and house outputs operate from separate banks. The ACR may independently connect them during charging.

COMBINE

The manual switch joins the banks for temporary emergency starting; the ACR is not intended to carry starter current.

Original functional drawing; it omits protective fuses, negatives, terminal order, alternator and start-isolation wiring. It must not be used as installation instructions. Consult the model-specific Blue Sea factory wiring diagrams below.

Which Blue Sea kit is which?

Model number Automatic charging relay Manual switch Format
7649 7601 m-ACR; 65A 6011 m-Series Dual Circuit Plus Mini kit
7650 7610 SI-ACR; 120A 5511e e-Series Dual Circuit Plus Standard kit
7650003 7610 SI-ACR; 120A 5511e e-Series Dual Circuit Plus Boxed 120A kit

65A and 120A describe the charging-relay capacity, not the maximum starting current of the battery switch. Blue Sea recommends 7649 for engine charging systems up to 65 amps and 7650 for systems up to 120 amps. For any RV or auxiliary-battery installation, independently check the charging equipment, battery chemistry, fusing, cable sizes and connection requirements.

Included electrical parts and their jobs

Component Function Identification
1 — Battery switch Manually turns the two load circuits OFF/ON or joins the banks in COMBINE. 6011 for 7649; 5511e for 7650 and 7650003.
2 — ACR Senses available charging and temporarily connects both battery positives; opens when needed for isolation. 7601 m-ACR for 7649; 7610 SI-ACR for 120A kits.
3 — Start-isolation connection Permits the relay to isolate banks during engine cranking when correctly wired. Follow the corresponding 7601 or 7610 instructions.
Before wiring: The ACR needs its specified ground connection and correctly sized fused battery leads. Battery-bank chemistry, charging profiles and the alternator/starter arrangement can change what equipment is appropriate. A qualified RV electrical technician should design and verify the actual system.

Compare the three kits in our catalog

Each card links to its exact NewRVParts product listing and catalog photo. Availability is shown on the product page; NewRVParts warehouse items are shipped and cannot be viewed or collected in person.

Blue Sea 7649 mini Add-A-Battery kit product photo from NewRVParts listing
7649-BSS Mini Add-A-Battery Kit65A charging relay (7601) and m-Series Dual Circuit Plus switch (6011).View kit and warehouse availability
Blue Sea 7650 120A Add-A-Battery kit catalog image on NewRVParts
7650-BSS Add-A-Battery Kit120A SI-ACR (7610) and e-Series Dual Circuit Plus switch (5511e).View kit and warehouse availability
Blue Sea 7650003 boxed Add-A-Battery kit image in NewRVParts catalog
7650003-BSS Boxed 120A KitManufacturer-listed boxed format of the 120A kit with 5511e and 7610.View kit and warehouse availability

Original Blue Sea instructions and installation drawings

The manufacturer provides 7649 mini kit details, 7650 kit details, and 7650003 boxed kit details. For wire-routing, fuse sizing, start-isolation and terminal diagrams, open the 7649 / 7601 installation PDF or the 7650 / 7610 installation PDF. Use the current instructions accompanying the exact kit for the installation.

Bulletin des pièces de VR

Inscrivez-vous pour nos prochaines promotions !

À propos de NewRVParts

NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.

Magasiner les pièces de VR