BAL Kingpin Tripod Parts Diagrams: 25033, 25035, 25037 & FASTJACK

Identify BAL fifth-wheel kingpin tripod stabilizers by exact model before buying a replacement, extension leg or gooseneck adapter. This guide distinguishes the 25033 Standard, 25035 Deluxe and 25037 Classic gooseneck tripods from the newer 25066 FASTJACK Weekender and 21100000 FASTJACK Full-Timer. Use the BAL 25035 factory exploded drawing, part-number table and product photos below to identify replacement components. A separate section covers the FASTJACK Weekender and Full-Timer.

Stabilizing only: kingpin tripods do not replace the fifth-wheel landing gear or the trailer's leveling jacks. Level and support the trailer on its approved landing gear first. BAL expressly warns against lifting the front of the trailer or taking weight off the landing gear with a tripod.

Choose the correct BAL tripod or accessory

The current BAL model pages give the height ranges shown below. Different adjustment mechanisms and coupler adapters must not be substituted solely because the products all have three legs.

Exact BAL MPN Tripod type Current height Important distinction
25033 Classic tripod 40–52 in No extension legs supplied; accepts optional 25001 extensions when appropriate.
25035 Deluxe tripod 41–68 in The only model whose 28-item exploded factory drawing is mapped below.
25037 Classic gooseneck tripod 29–41 in For a compatible 2-5/16-in gooseneck coupler; not a FASTJACK.
25066 FASTJACK Weekender 40–60 in Manufacturer-published spare parts below specifically identify Weekender.
21100000 FASTJACK Full-Timer 39–61 in 23-lb full-time version; do not assume Weekender repair parts interchange.
25067 FASTJACK adapter Adapter only Maker confirms compatibility with 25066 and 21100000; no tripod included.
Older-versus-current specifications: an older BAL brochure lists 25033 at 44–50 in, 25035 at 44–66 in and 25037 at 34–38 in, while current BAL pages identify 40–52, 41–68 and 29–41 in respectively. The older FASTJACK brochure mentions 37–60 in; the manufacturer's current 25066 page specifies 40–60 in. These are publication differences, not evidence that a particular older physical unit can reach a newer model's limit. Measure the installed assembly and check its label.

Tripods and FASTJACK accessories

Compare the Standard, Deluxe and gooseneck tripods with the two FASTJACK models below. The 25067 adapter is sold separately and does not include the tripod.

BAL 25033 Standard fifth-wheel tripod, fixed legs25033 · Classic tripodStandard fifth-wheel tripod, fixed legsCurrent range: 40–52 inView part detailsBAL 25035 Fifth-wheel tripod with three extension legs25035 · Deluxe tripodFifth-wheel tripod with three extension legsCurrent range: 41–68 inView part detailsBAL 25037 Gooseneck coupler tripod, adapter included25037 · Classic gooseneck tripodGooseneck coupler tripod, adapter includedCurrent range: 29–41 inView part detailsBAL 25066 Ratchet-adjustable, lightweight fifth-wheel tripod25066 · FASTJACK WeekenderRatchet-adjustable, lightweight fifth-wheel tripodCurrent range: 40–60 inView part detailsBAL 21100000 Heavy-use hybrid aluminum/steel ratcheting tripod21100000 · FASTJACK Full-TimerHeavy-use hybrid aluminum/steel ratcheting tripodCurrent range: 39–61 inView part detailsBAL 25067 2-5/16-in gooseneck ball-replicating adapter25067 · FASTJACK adapter2-5/16-in gooseneck ball-replicating adapterCurrent range: Adapter onlyView part details

BAL 25035 Deluxe factory exploded diagram

Manufacturer referenceBAL 25035 factory 28-part exploded assembly and illustrated tripod parts listOpen original manufacturer PDF
BAL 25035 factory 28-part exploded assembly and illustrated tripod parts list. Original BAL RV Products manufacturer drawing displayed within the page. If the embedded PDF does not load on your device, open the exact manufacturer drawing in a new tab. Use the numbered table below for selecting exact parts; the simplified illustration is available as an optional visual aid.
View original simplified illustration (supplement only)
BAL 25035 Deluxe tripod exploded-parts orientation with factory callouts An original simplified component locator for BAL 25035; jack flange 8, screw 3, handle 9, outer jacking tube 1, tube nut 2, two support legs 4, extension tubes 5, base pads 6, chain hook 7, 28-inch chain 10, detent pin 22, 6-foot chain 23, and locking clasp 28. Use BAL's own exploded diagram for physical assembly. 8 · flange 9 · handle 1 / 2 / 3center tube & screw 4 · support leg 5 · extension 6 · basepad 6 · basepad 10 / 23 / 28 · chain & clasp Parts overview only — use the factory drawing for assembly details
This simplified illustration highlights the main tripod components. Its numbers match the factory 25035 assembly; use BAL's actual 28-item exploded drawing (PDF page 1) to see every component and fastener in position.

25035 Deluxe replacement parts by number

The numbered components below belong to the 25035 Deluxe tripod. Do not use the same part numbers for 25033, 25037 or FASTJACK models without a separate manufacturer match. The factory 28-item chart also identifies the remaining screws and washers.

Factory item Original part Function Store match
1 P852002 Outer tube assembly, jacking leg Not linked
2 P852028 Tube/nut assembly Not linked
3 P852018 Drive screw assembly Not linked
4 P852001 Support leg Not linked
5 P852004 Extension tube Not linked
6 P852031 Base pad Not linked
7 R852011 Chain hook Not linked
8 P852071 Jack flange at the pin box Not linked
9 P852026 Folding screw handle Not linked
10 R852039 28-in chain Not linked
11 502109 7/16-in USS washer Not linked
12 R852010 Nylon washer Not linked
13 502103 Nylon washer for assembly joints Not linked
14 7034 Nylon spacer washer Not linked
18 BAL1014 3/8-16 nylon-locking nut Not linked
22 R852013 Detent pin Not linked
23 R852012 6-ft chain Not linked
24 502113 3/8-16 × 3/4-in hex bolt Not linked
28 R852038 Locking clasp Not linked

The manufacturer's illustrated assembly also distinguishes the three base-pad locations: two support legs have chain arrangements different from the telescoping jacking leg. The chain hook and locking clasp help tension and retain the tripod's base spread. Incorrectly assembling a chain or drive screw can defeat stability; consult the original BAL assembly illustrations.

FASTJACK Weekender and Full-Timer components

BAL FASTJACK Weekender and Full-Timer ratcheting tripod components Original schematic showing a FASTJACK top flange bracket and padlock, three ratchet adjustable legs, tension handles, cross-link arms, large foot pads and a separate 25067 gooseneck adapter. Weekender spare parts 825103, 825104, 851106, 851107, 851108, 851109 and 851113 are not assumed to fit Full-Timer. Top bracket + padlock Ratcheting legtension handle Leg adjustmentratchet handle Cross-link arms Large foot pad 25067 adapter FASTJACK component overview — follow BAL's instructions for setup and safety
Overview of the Weekender and Full-Timer FASTJACK components. The Weekender spare-part numbers in the following table are published by BAL; do not infer these components are interchangeable with the heavier Full-Timer without an exact manufacturer cross-reference.

FASTJACK Weekender replacement component references

BAL replacement number What it identifies Compatibility check
825103 Tripod base assembly Weekender 25066 only; verify original revision
825104 Adjustable leg assembly Weekender 25066 only; not established for Full-Timer
851106 Leg footpad Weekender 25066 only
851107 Center bracket Weekender 25066 only
851108 Cross-link arm Weekender 25066 only
851109 Clamp Weekender 25066 only
851113 Padlock Weekender 25066 only

On the FASTJACK, the top bracket attaches to the kingpin's lower flange and the three independently adjustable legs use ratcheting tension handles. The BAL instructions require a secure top bracket and footpads on a stable surface, and warn not to over-tension or use the tripod as a lifting device.

Gooseneck: two different adapter situations

BAL 25037 Classic gooseneck tripod already includes its coupler adapter and is intended for a compatible 2-5/16-in gooseneck setup. The separate BAL 25067 FASTJACK gooseneck adapter is confirmed by BAL for 25066 Weekender and 21100000 Full-Timer only. The adapter replicates a 2-5/16-in ball for the gooseneck coupler; it is not automatically a Classic 25033/25035 adapter.

For the Classic 25033 and 25037, BAL publishes optional 25001 extension legs with adjustment positions spaced 3 in apart. An exact NewRVParts product for 25001 was not confirmed, so it remains plain text instead of linking to a different part.

BAL tripod parts diagrams and operating instructions

25035 factory exploded drawing and 28-part chart 25037 Classic gooseneck factory instructions 25066 / 21100000 FASTJACK operation and safety PDF Original BAL comparison brochure (historical dimensions)

Follow BAL's instructions when assembling, folding or adjusting a tripod. Keep the feet on firm, level ground and avoid finger-pinch points when changing leg positions.

Related NewRVParts reference material

Jacks & LevelingRV Jacks & LevelingRV awning and jack diagram index

Bulletin des pièces de VR

Inscrivez-vous pour nos prochaines promotions !

À propos de NewRVParts

NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.

Magasiner les pièces de VR