Attwood Jon Boat Seat Mounts: Rails, Clamps & Swivels

Adding a seat to a Jon boat or replacing worn mounting hardware? Attwood offers different ways to secure, adjust or remove a marine seat. A bench rail kit, a clamp-on swivel and a quick-disconnect fitting solve different problems; none should be selected by appearance alone.

Which type of seat mounting hardware do you need?

Slide along a benchChoose the SP-15900 seat-plate-and-rail kit when the bench installation calls for its included 15-inch rails. SP-15100 is the separate aluminum seat plate when suitable rails are already in place.
Clamp or remove a seat15700-3 is a clamp-on swivel with a specified 7½–18-inch adjustment range. For easy seat removal, 11602D1 is a separate quick-disconnect fitting sized for 6¼-inch swivels and plates.
Adjust position or rotation815000 provides 4½ inches of fore/aft movement, 7062-3 supplies a 6-inch offset, and 17720/17721 are different-size seat swivels. Match each to its installation.

Attwood Jon-boat seat mounting parts comparison

Attwood MPN Mounting method Key specification Check first
SP-15900 Bench rail kit Seat plate plus 15-inch rails Match the bench and rail installation; a swivel is not specified in the kit contents
SP-15100 Bench seat plate Plate only; rails not included Use when the existing compatible rails can be retained
15700-3 Clamp-on swivel Adjusts from 7½ to 18 inches Compare bench dimensions and seat mounting pattern
11602D1 Quick-disconnect mount For 6¼-inch swivels and plates Confirm the exact plate size and mounting layout
815000 Deck-mounted slide 4½-inch fore/aft travel; 1⅝-inch overall height Check deck attachment, clearance and seat-side fasteners
7062-3 Seat swivel offset 6-inch offset for added clearance Verify the assembly and seat position before using an offset
17720 Flat seat swivel 6¼-inch plate; 0° tilt Match the original plate and bolt-hole pattern
17721 Tilted seat swivel 7-inch plate; 3° tilt Check both tilt requirement and plate dimensions
What's included matters: SP-15900 supplies an aluminum seat plate and 15-inch rails; SP-15100 is the plate only. Neither listing specifies an included seat swivel. If a swivel is required, identify its plate dimensions and mounting pattern separately.

Before mounting a new boat seat

  1. Identify the support: check whether the existing seat mounts to a bench, pedestal, deck or rail system. Do not treat a bench clamp as a universal deck fitting.
  2. Measure the actual contact area: compare the bench width and clamp range, rail length or existing plate size with the listed manufacturer specifications.
  3. Check the mounting pattern: 17720 uses a 6¼-inch swivel plate with 0° tilt; 17721 uses a 7-inch plate with 3° tilt. Similar appearance does not make them direct replacements.
  4. Keep quick-release size separate: 11602D1 is specified for 6¼-inch swivels and plates; matching this nominal size is not by itself proof of identical fastener locations or complete assembly compatibility.
  5. Plan for movement: leave enough clearance for rotation, the 815000 slide's travel, or the 7062-3 offset without interfering with the gunwale, controls or other equipment.
  6. Confirm the complete installation: verify appropriate fastening, support structure, manufacturer instructions and any required seating classification before using a new mounting configuration.

Shop the matching Attwood components

These cards open the exact manufacturer numbers in the NewRVParts catalog. Products ship from supplier warehouses; in-person warehouse pickup or viewing is not offered.

Attwood SP-15900 bench rail kit for marine seating
Attwood SP-15900

Bench rail kit · Seat plate plus 15-inch rails

Match the bench and rail installation; a swivel is not specified in the kit contents

See exact product
Attwood 815000 deck-mounted slide for marine seating
Attwood 815000

Deck-mounted slide · 4½-inch fore/aft travel; 1⅝-inch overall height

Check deck attachment, clearance and seat-side fasteners

See exact product

More marine seat hardware references

Need a pedestal rather than a bench mount? See our Attwood Lock'N-Pin post selection guide, Snap-Lock pedestal reference and 238 Series pedestal-kit comparison.

Bulletin des pièces de VR

Inscrivez-vous pour nos prochaines promotions !

À propos de NewRVParts

NewRVParts est une boutique en ligne spécialisée dans les pièces et accessoires neufs pour véhicules récréatifs, les équipements pour caravanes portées, les pièces de remorquage et de remorques, les accessoires pour camions et les produits nautiques. Nous servons nos clients partout au Canada et aux États-Unis, en expédiant des produits de fabricants de confiance via un vaste réseau de distribution nord-américain. Magasinez en ligne pour obtenir des pièces de rechange, des équipements et des accessoires livrés directement à votre porte.

Magasiner les pièces de VR