The TorkLift F2016 front tie-down package places two removable camper anchor points on the frame of specific 8-foot-bed Ford Super Duty pickups. The receiver brackets remain attached to the truck, while the inserts slide out when the camper is not mounted.
See the F2016 tie-down pair
These photos are taken from the NewRVParts listing for the exact F2016 kit. Select a photo to view the product details.
Front tie-down assembly and included pieces
The front kit has a frame receiver on each side and a removable insert at each location. The following is a component identification guide, not a substitute for the factory's vehicle-specific installation drawing.
| Component | Quantity | Purpose |
|---|---|---|
| Left front frame-mounted bracket / receiver | 1 | Bolts to the prescribed driver-side truck frame location |
| Right front frame-mounted bracket / receiver | 1 | Bolts to the corresponding passenger-side frame location |
| Removable steel tie-down inserts | 2 | Slide into the fixed receivers to provide camper attachment points |
| Retaining pins and clips | 2 sets | Secure the removable inserts in their receivers |
| Vehicle-specific installation hardware | Supplied kit | Bolts, nuts, washers and spacers as specified for the exact vehicle kit |
| Original fitting instructions | Supplied kit | Manufacturer illustrations, fastener arrangement and torque procedure |
How the camper is secured
Connection path for identification only; brackets, clearances and routing depend on the exact truck.
Find the correct Super Duty mounting kit
- The manufacturer's application chart identifies select 2011–2016 Ford F-250, F-350 and F-450 Super Duty 8-foot-bed configurations. Cab and equipment details still matter.
- Confirm the vehicle year, cab, box length, chassis and installed running boards or accessories against the current TorkLift application chart. F2016 is not a general fit for every Super Duty.
- F2016 is the steel front pair; the aluminum/stainless Talon version has a separate manufacturer number.
Mounting and inspection
Review the factory F2016 installation reference and included hardware chart before fitting the frame-side brackets. Use only the designated mounting locations and hardware arrangement; verify insert engagement and pin retention after installation.
Complete the camper tie-down system
Front brackets alone do not secure all four camper corners. These separately listed products may be useful after selecting the correct rear brackets and measuring the required turnbuckle range.
S9700 — TorkLift removable tie-down insert lock setFour keyed-alike locks for suitable TorkLift receiver inserts; not included
S9522 — TorkLift Original FastGun long turnbuckles, pairTwo long-range spring-loaded turnbuckles, 25–43 inches; sold separately
S9000 — TorkLift Basic SpringLoad kitSpring-loaded turnbuckle components for two tie-down connections; sold separately
Manufacturer fitting instructions
TorkLift provides original application, mounting and service information for this part. Use the exact printed instruction sheet shipped with the kit for its mounting diagrams, bolt placement and torque values.
View the TorkLift F2016 manufacturer information