C2224 supplies the two steel front frame-mounted camper tie-downs for selected Chevrolet Silverado and GMC Sierra 1500 pickups. The brackets stay bolted to the frame while their tie-down inserts can be removed when the camper is off the truck.
See the C2224 tie-down pair
These photos are taken from the NewRVParts listing for the exact C2224 kit. Select a photo to view the product details.
Front tie-down assembly and included pieces
The front kit has a frame receiver on each side and a removable insert at each location. The following is a component identification guide, not a substitute for the factory's vehicle-specific installation drawing.
| Component | Quantity | Purpose |
|---|---|---|
| Left front frame-mounted bracket / receiver | 1 | Bolts to the prescribed driver-side truck frame location |
| Right front frame-mounted bracket / receiver | 1 | Bolts to the corresponding passenger-side frame location |
| Removable steel tie-down inserts | 2 | Slide into the fixed receivers to provide camper attachment points |
| Retaining pins and clips | 2 sets | Secure the removable inserts in their receivers |
| Vehicle-specific installation hardware | Supplied kit | Bolts, nuts, washers and spacers as specified for the exact vehicle kit |
| Original fitting instructions | Supplied kit | Manufacturer illustrations, fastener arrangement and torque procedure |
How the camper is secured
Connection path for identification only; brackets, clearances and routing depend on the exact truck.
Chevrolet/GMC 1500 fitment checkpoints
- Manufacturer application: select 2019–2026 Silverado 1500 and Sierra 1500 trucks, with 5.75-foot or 6.5-foot bed configurations.
- Confirm cab, bed, factory exhaust routing and running-board length in TorkLift's vehicle-specific fit finder. Longer bed-extending boards may prevent the required mounting clearance.
- This is the standard steel C2224; C2224A-P is the separately numbered Talon material version.
Mounting and inspection
For C2224, the receivers align with prescribed factory mounting points near the cab/frame outrigger. Hardware orientation and torque must follow the printed C2224 instruction sheet; simply having the correct bed length does not establish a fit.
Complete the camper tie-down system
Front brackets alone do not secure all four camper corners. These separately listed products may be useful after selecting the correct rear brackets and measuring the required turnbuckle range.
S9700 — TorkLift removable tie-down insert lock setFour keyed-alike locks for suitable TorkLift receiver inserts; not included
S9522 — TorkLift Original FastGun long turnbuckles, pairTwo long-range spring-loaded turnbuckles, 25–43 inches; sold separately
S9000 — TorkLift Basic SpringLoad kitSpring-loaded turnbuckle components for two tie-down connections; sold separately
Manufacturer fitting instructions
TorkLift provides original application, mounting and service information for this part. Use the exact printed instruction sheet shipped with the kit for its mounting diagrams, bolt placement and torque values.
View the TorkLift C2224 manufacturer information