{"product_id":"raymarine-m81105-rotary-rudder-reference-xdcr","title":"Raymarine M81105 Rotary Rudder Reference Transducer with 10m Cable","description":"\u003cp\u003eProvide your marine autopilot with accurate steering feedback using the Raymarine M81105 rotary rudder reference transducer. The sensor links mechanically to the rudder or steering arm and reports its actual position to a compatible course computer, helping the autopilot compare commanded rudder movement with the boat's steering response.\u003c\/p\u003e\u003ch3\u003eWhere it fits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEssential rudder-angle reference component for Raymarine Evolution systems with an ACU-300 running the required firmware (version 3.13 or newer).\u003c\/li\u003e\n\u003cli\u003eRecommended feedback sensor for other compatible Evolution autopilot control units.\u003c\/li\u003e\n\u003cli\u003eReplacement for supported Raymarine and Autohelm inboard pilot installations and ST60\/ST60+ rudder-angle instruments.\u003c\/li\u003e\n\u003cli\u003eCan feed compatible i70, i70s, ST70 and ST70+ displays through a separate Raymarine iTC-5 transducer converter and SeaTalkng network.\u003c\/li\u003e\n\u003cli\u003eSPX autopilot systems generally take the reference sensor at the pilot course computer rather than through an instrument converter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical and installation information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaymarine manufacturer part number: M81105\u003c\/li\u003e\n\u003cli\u003eSensor type: rotary rudder position reference using a single-turn 5 kΩ potentiometer\u003c\/li\u003e\n\u003cli\u003eIncluded cable: 10 m (32.8 ft) fixed lead with stripped wire ends\u003c\/li\u003e\n\u003cli\u003eMechanical travel: up to approximately 60° to either side of the centered position\u003c\/li\u003e\n\u003cli\u003eInstallation: mounting base and adjustable linkage connect the sensor's rotating arm to the rudder tiller mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's supplied\u003c\/h3\u003e\u003cp\u003eM81105 rudder position sensor with attached 10 m cable, mounting stud and nuts, pair of ball-joint fittings, tiller pin, fastening screws and installation information.\u003c\/p\u003e\u003cp\u003ePosition the arm correctly when the rudder is amidships, then verify it cannot be driven against either mechanical stop over the full steering range. This is a wired analog reference sensor, not a stand-alone SeaTalkng network device; the correct course computer or iTC-5 interface must be present.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":48541662085326,"sku":"M81105","price":458.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/51n1kmaotyl._sl1500.jpg?v=1794914079","url":"https:\/\/newrvparts.com\/es-ca\/products\/raymarine-m81105-rotary-rudder-reference-xdcr","provider":"New RV Parts","version":"1.0","type":"link"}