{"product_id":"go-power-power-inverter-5000w-continuous-80179","title":"Go Power GP-5000HD 5,000W Modified Sine Wave Inverter – 80179","description":"\u003cp\u003eThe Go Power GP-5000HD (part number 80179) is a high-output 12V modified sine wave inverter for mobile power systems and compatible heavy electrical loads. It delivers 5,000W of continuous AC power with a 10,000W surge rating, four standard North American AC outlets and a USB charging port.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5,000W continuous output and 10,000W maximum surge\u003c\/li\u003e\n\u003cli\u003eModified sine wave output\u003c\/li\u003e\n\u003cli\u003eFour standard North American AC outlets\u003c\/li\u003e\n\u003cli\u003eUSB charging port rated 5V DC, 2.1A\u003c\/li\u003e\n\u003cli\u003eOptional GP-HD-R remote on\/off control, sold separately\u003c\/li\u003e\n\u003cli\u003eThermostatically controlled cooling fan\u003c\/li\u003e\n\u003cli\u003eProtection against overload, short circuit, over-temperature and over\/under-voltage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGP-5000HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e80179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal battery system\u003c\/th\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage range\u003c\/th\u003e\n\u003ctd\u003e10.5–16V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous output\u003c\/th\u003e\n\u003ctd\u003e5,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum surge\u003c\/th\u003e\n\u003ctd\u003e10,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput waveform\u003c\/th\u003e\n\u003ctd\u003eModified sine wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC output\u003c\/th\u003e\n\u003ctd\u003e100–120V AC RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e80% minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNo-load current draw\u003c\/th\u003e\n\u003ctd\u003e1.2A maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB output\u003c\/th\u003e\n\u003ctd\u003e4.75–5.25V DC, 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLow-battery alarm\u003c\/th\u003e\n\u003ctd\u003e10.5V DC ±0.5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLow-battery shutdown\u003c\/th\u003e\n\u003ctd\u003e10V DC ±0.5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0–40°C (32–104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e18.50 × 9.92 × 4.13 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e15.65 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eBattery and installation requirements\u003c\/h3\u003e\u003cp\u003eAt full output, this inverter can draw more than 400A from a 12V battery bank. It requires a suitably sized battery bank, short high-current DC cable runs and correctly rated overcurrent protection. Go Power's manual specifies 4\/0 AWG copper cable and an F-400 400A fuse or circuit breaker; the GP-DC-KIT5 is the recommended installation kit and is sold separately. Follow the manual for cable length, fuse placement, grounding, ventilation and clearances. Have the high-current battery connections completed by a qualified installer.\u003c\/p\u003e\u003ch3\u003eChoosing the right inverter\u003c\/h3\u003e\u003cp\u003eModified sine wave output is not suitable for every electronic device. Sensitive electronics, computers, medical equipment and some chargers may not operate correctly. Choose a pure sine wave inverter for those applications. Keep the continuous load within 5,000W and allow for motor and appliance start-up surges. The optional GP-HD-R remote control is sold separately.\u003c\/p\u003e","brand":"Go Power","offers":[{"title":"Default Title","offer_id":48378294239438,"sku":"73-4505","price":897.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_50692532-311e-474d-b343-61a12953a200.jpg?v=1789856184","url":"https:\/\/newrvparts.com\/en-us\/products\/go-power-power-inverter-5000w-continuous-80179","provider":"New RV Parts","version":"1.0","type":"link"}