Renogy makes two different 30-amp REGO MPPT solar controllers: the RCC2430REGO-G1-US (5233850) for 12/24V batteries and the RCC30REGO-G1-US (5221079) for 12/24/36/48V systems. This guide compares them by their manufacturer model numbers, input ratings, connection styles and product photographs.
Find the solar and battery connections
The compact 5233850 uses four positive/negative PV and battery terminals. The larger 5221079 uses a different connection layout designed for higher-voltage battery and solar systems. The illustrations below explain functions only; never use them as wire-terminal placement diagrams.
RCC2430REGO — four terminal clamps
Basic terminal-function locator for 5233850; see the factory manual for the actual left-to-right order, wire gauge and enclosure installation.
RCC30REGO — connector-based wiring
Functional overview of the larger 5221079 model. Connector shapes and pin assignments must be checked against its exact instruction manual.
Model number, current and voltage limits
The battery system voltage, solar open-circuit limit and connector arrangement must all match the installed controller. In cold weather, PV open-circuit voltage rises, so the total array must remain below the model's maximum under worst-case conditions.
| Reference | Renogy model | Battery voltage | Rated current | PV limit | Connection style |
|---|---|---|---|---|---|
| Renogy 5233850 | RCC2430REGO-G1-US | 12V / 24V | 30A | 100V max solar Voc | 4 screw/clamp terminals |
| Renogy 5221079 | RCC30REGO-G1-US | 12V / 24V / 36V / 48V | 30A | 150V max solar Voc | Amphenol-type connectors |
| Renogy 5224674 | RCC60REGO-G2-US | 12V | 60A | 100V max solar Voc | Anderson connectors |
With a 12V system, the 5233850 uses the smaller terminal-block architecture, while the RCC30REGO model is intended for a wider range of battery voltages. Neither a 30A model nor a 60A model should be treated as a drop-in substitution without checking physical mounting, charging profiles, connector type and wiring protection.
Correct connection sequence and monitoring
Follow the manufacturer instruction manual for the required battery-first connection sequence, configuration and PV disconnection procedure. The REGO devices support compatible Renogy monitoring through their documented communication hardware; other brands' RV-C displays are not assumed to connect to these controllers.
View the exact Renogy controllers
These cards link to each original model number on NewRVParts, including a separate 60A REGO reference for distinguishing the different body design.
Original Renogy wiring and installation documentation
The factory manuals show terminal orientation, connection sequence, wire sizing and battery configuration, which are intentionally not represented as installation instructions in the diagrams above.
RCC2430REGO 30A original manual (PDF) · RCC30REGO 30A manufacturer product and resources · Renogy manual library