MORryde StepAbove Gen 2 Parts Guide and Doorway Fit Chart

MORryde StepAbove Gen 2 RV steps provide a ground-supported, manual entry staircase that folds into the doorway for travel. The factory model list has different step heights, rises and doorway widths. Use the chart below to match your actual RV opening rather than assuming that every two-, three- or four-step version will fit.

These standard StepAbove Gen 2 models have a 500 lb rated capacity, quick-release mounting and adjustable support legs. Strut-assist models are a separate configuration with different installation and measurement requirements.

MORryde StepAbove Gen 2 model and doorway chart

The manufacturer lists both the door size printed on the factory label and the actual opening measured from flange to flange. Check the ground-to-threshold height range and the rise before selecting a model.

MORryde MPN Steps Step height Step rise Door label Flange-to-flange width
STP-201 2 25–29.5 in 9 in 24-inch 21.75–22.25 in
STP-202 2 25–29.5 in 9 in 26–28-inch 23.75–26.25 in
STP-203 3 34–37 in 9 in 24-inch 21.75–22.25 in
STP-204 3 30–33.5 in 8 in 24-inch 21.75–22.25 in
STP-206 3 30–33.5 in 8 in 26–28-inch 23.75–26.25 in
STP-207 3 34–37 in 9 in 26–28-inch 23.75–26.25 in
STP-208 3 30–33.5 in 8 in 30–32-inch 27.75–30.25 in
STP-209 3 34–37 in 9 in 30–32-inch 27.75–30.25 in
STP-212 4 37.5–42 in 8 in 26–28-inch 23.75–26.25 in
STP-213 4 37.5–42 in 8 in 30–32-inch 27.75–30.25 in

For example, STP-206 and STP-207 are both for the 26- to 28-inch labelled door family, but they have different step rises and height ranges. Similarly, STP-208 and STP-209 are not identical despite their shared nominal doorway size.

Gen 2 hinge and latch installation drawings

MORryde's original installation guide shows the hinge plate against the threshold, the top-corner mounting screws, the latch engagement and adjustment, and the final hinge-plate fastening. The steps must be correctly seated in the doorway before the door is tested.

MORryde StepAbove Gen 2 factory drawing

MORryde uses distinct doorway width, height and step-rise combinations. The exact STP model and door measurements appear in the table above; open the installation PDF for hinge-plate and latch-placement drawings.

Open manufacturer installation drawing
MORryde's StepAbove Gen 2 installation illustrations. Open the complete manufacturer's instruction PDF.

View MORryde's complete original doorway qualification guide for the dimensions and installation conditions that need to be checked before purchase.

StepAbove Gen 2 models with product photographs

Compare the standard two-, three- and four-step Gen 2 models below. The listed models vary in length and doorway width, so use their MPNs alongside the chart rather than selecting by photo alone.

MORryde StepAbove Gen 2 2-step RV entry assembly; NewRVParts product photo of MPN STP-201
STP-201MORryde StepAbove Gen 2 2-step RV entry assemblyView product
MORryde StepAbove Gen 2 2-step RV entry assembly; NewRVParts product photo of MPN STP-202
STP-202MORryde StepAbove Gen 2 2-step RV entry assemblyView product
MORryde StepAbove Gen 2 3-step RV entry assembly; NewRVParts product photo of MPN STP-203
STP-203MORryde StepAbove Gen 2 3-step RV entry assemblyView product
MORryde StepAbove Gen 2 3-step RV entry assembly; NewRVParts product photo of MPN STP-204
STP-204MORryde StepAbove Gen 2 3-step RV entry assemblyView product
MORryde StepAbove Gen 2 3-step RV entry assembly; NewRVParts product photo of MPN STP-206
STP-206MORryde StepAbove Gen 2 3-step RV entry assemblyView product
MORryde StepAbove Gen 2 3-step RV entry assembly; NewRVParts product photo of MPN STP-207
STP-207MORryde StepAbove Gen 2 3-step RV entry assemblyView product
MORryde StepAbove Gen 2 3-step RV entry assembly; NewRVParts product photo of MPN STP-208
STP-208MORryde StepAbove Gen 2 3-step RV entry assemblyView product
MORryde StepAbove Gen 2 3-step RV entry assembly; NewRVParts product photo of MPN STP-209
STP-209MORryde StepAbove Gen 2 3-step RV entry assemblyView product
MORryde StepAbove Gen 2 4-step RV entry assembly; NewRVParts product photo of MPN STP-212
STP-212MORryde StepAbove Gen 2 4-step RV entry assemblyView product
MORryde StepAbove Gen 2 4-step RV entry assembly; NewRVParts product photo of MPN STP-213
STP-213MORryde StepAbove Gen 2 4-step RV entry assemblyView product

Final doorway and clearance checks

Measure at the doorframeUse the inside flange-to-flange opening specified by MORryde. A door label is a useful reference, not a replacement for physical measurement.
Check the step heightMeasure the ground-to-threshold height with the RV level. Match the height range and step rise together.
Check the entry interiorVerify clearance for the raised, stowed steps and that the latch can meet the door flange without striking trim.
Check the hingesGen 2 uses quick-release hinges. Components sold for first-generation conversions are not necessarily Gen 2 replacement parts.
Operating safety: MORryde instructs users to raise and lower these steps from outside the RV. Check the latch engagement before travel, and follow the correct Gen 2 installation manual for mounting hardware and structural support.

Related RV parts guides

Lippert SolidStep 3.0Lippert Solid Step 4.0Model-specific parts diagrams

Manufacturer reference: MORryde StepAbove Gen 2 product and manuals.

Save on Parts & Accessories

Sign up for special offers, new product updates, and deals on RV, truck camper, towing, truck, and marine parts and accessories.

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts