The Husky Center Line FS weight distribution hitch uses round spring bars and frame-mounted lift brackets to distribute trailer tongue load. The original 2023 manufacturer drawing identifies the head, shank, spring-bar retainers, mounting plates and associated hardware by numbered callout. This guide helps distinguish the three FS capacities before replacing a component.
Original Husky exploded parts and installation drawings
Find the reference on the source drawing, then read its description in the numbered table. Open the original manufacturer manual for enlarged details; drawings and service hardware can vary by revision.
Illustration 26 β Center Line FS exploded view
The original Husky PDF can be enlarged to check callouts and hardware.
Factory parts chart and 33310/33311/33312 columns
The original Husky PDF can be enlarged to check callouts and hardware.
Open factory parts chart and 33310/33311/33312 columns (PDF)
Frame mounting brackets and plates
The original Husky PDF can be enlarged to check callouts and hardware.
Components by factory callout
The manufacturer drawings use numbers for components and separate kit numbers for service packages. An empty purchase cell means that an exact part or documented kit has not been linked from the current NewRVParts catalog.
| Drawing number | Component | OEM kit | NewRVParts |
|---|---|---|---|
| 1 | Hitch head weldment | 33314 | |
| 2 | 9-hole, 10-inch, 2-inch square shank | 30860 | |
| 3 | 5/8-inch receiver hitch pin | ||
| 4 | 5/8-inch retaining hairpin | ||
| 5 | FS spring bar, 400β600 lb tongue-weight pair rating | 33315 | View exact MPN |
| 5 | FS spring bar, 600β800 lb tongue-weight pair rating | 33316 | View exact MPN |
| 5 | FS spring bar, 800β1,200 lb tongue-weight pair rating | 33317 | View exact MPN |
| 6 | Hook shim | ||
| 7 | 3/4-inch hardened flat washer | ||
| 8 | 3/4-10 Γ 4.5-inch Grade 5 bolt | ||
| 9 | 1/4-inch D retaining pin | 33324 | |
| 10 | 3/4-inch nylon-insert locknut | ||
| 11 | 5/8-inch flat washer | ||
| 12 | 5/8-11 hex nut | ||
| 13 | 5/8-11 Γ 2.5-inch hex-head bolt | ||
| 14 | M6-1 hex-head nut | ||
| 15 | M6 lock washer | ||
| 16 | M6 flat washer | ||
| 17 | Lift tool | ||
| 18 | M6-1 Γ 30-mm hex-head bolt | ||
| 19 | Lift bar | ||
| 20 | 1/2-13 Γ 1.25-inch serrated flange bolt | ||
| 21 | Lift bracket / spring-bar support | ||
| 22 | Trailer frame mounting bracket | ||
| 23 | Trailer frame mounting plate | ||
| 24 | 1/2-13 Γ 4-inch carriage bolt | ||
| 25 | 1/2-inch hardened flat washer | ||
| 26 | 1/2-inch lock washer | ||
| 27 | 1/2-13 hex nut | ||
| 28 | L pin with washer and tether | ||
| 29 | 2-5/16-inch hitch ball | 30255 | |
| 30 | 1-1/4-inch hitch-ball lock washer | ||
| 31 | 1-1/4-12 hitch-ball nut |
Compare the exact models and replacement kits
Use the full model number and the original manufacturer manual before selecting a different spring bar, head or mounting kit. The ratings shown here are for the manufacturer-specified configuration, not a guarantee of fitment for other hitches.
| MPN | Rated tongue load | Trailer load | Configuration |
|---|---|---|---|
| 33310 | 400β600 lb | 6,000 lb | Complete FS hitch |
| 33311 | 600β800 lb | 8,000 lb | Complete FS hitch |
| 33312 | 800β1,200 lb | 12,000 lb | Complete FS hitch |
| 33315 | 400β600 lb | β | Individual FS spring bar; match pair |
| 33316 | 600β800 lb | β | Individual FS spring bar; match pair |
| 33317 | 800β1,200 lb | β | Individual FS spring bar; match pair |
| 33321 | β | β | FS hardware kit; confirm included pieces |
NewRVParts product photographs







What to confirm before buying
The FS spring bars are manufacturer numbers 33315, 33316 and 33317; each NewRVParts bar listing describes a single bar, while the manual specifies matched bars in pairs. The numbers 32328 and 32329 refer to Center Line TS components, not interchangeable FS spares. Hardware kit 33321 and retaining-pin kit 33324 are identified in the factory service chart, but the pin listing's generic description has not been established as a precise match and is deliberately left unlinked.
