Find replacement arms, fabric roller assemblies and controls for Dometic 9100 and 9200 powered awnings. The 9100 uses 8952-series arm hardware; the 9200 uses 8962-series arm hardware. Compare the original model, arm geometry, wiring route and manufacturer number before ordering.
Factory installation drawings for 9100 and 9200 hardware
The 9100 installation guide shows mounting geometry and arm hardware, while Dometic's shared FRTA service manual includes separate 9200 end-cover illustrations. Use the diagrams to identify the correct awning family; they are not interchangeable exploded-parts lists.
How the 9100 and 9200 arm families differ
The A–R letters identify the component groups in this comparison. Use Dometic's factory drawings for exact positions, mounting and service procedures.
9100 power awning: product photos
Compare the basement, standard and reduced-pitch 9100 arm sets below, plus an example of a 16-foot Onyx LED fabric roller tube assembly. Select a photograph to see the product details; arm hardware and fabric rollers are sold separately.
9100 basement power arm hardware — blackBasement-height hardware; not standard or reduced-pitch. Match original 8952 arm code and RV clearances.
B · 8952002.400UL
9100 standard power arm hardware — blackStandard 8952 geometry; verify model family, mounting height and bottom-exit harness.
B · 8952002.400BL
9100 standard power arm hardware — polar whiteWhite standard variant; not a basement or reduced-pitch arm.
C · 8952003.400UL
9100 reduced-pitch arm hardware — blackReduced-pitch 8952 kit; clearances and arm geometry differ from standard.
E · 915NR16.300UL
9100 16-foot Onyx LED fabric roller tube assemblyFRTA only; size, fabric code, LED and end-cap finish must match. Arm hardware sold separately.
9100 numbered parts and options
| Key | Dometic MPN | Part or assembly | Selection notes |
|---|---|---|---|
| A | 8952001.400UL | Basement-height arm hardware, black | Matches selected 910/915/917 basement variants; motor-side and wiring details matter. |
| B | 8952002.400UL | Standard-height arm hardware, black | Bottom-wire route and standard projection; different from basement/reduced. |
| B | 8952002.400BL | Standard-height arm hardware, polar white | Colour and correct standard geometry. |
| C | 8952003.400UL | Reduced-pitch arm hardware, black | Different pitch/door-clearance geometry from standard. |
| D | 3310455.062 | Wall-mounted extend/retract switch | Optional switch kit identified in Dometic 9100 hardware installation manual. |
| E | 915NR16.300UL | 16-ft 9100 Onyx LED FRTA | Roller tube + fabric assembly; not an arm kit. Verify exact fabric revision. |
| J | 3312487.006U | Standard black arm half set, selected 9100 models | One arm assembly, not a complete pair; check exact original 8952 subtype. |
| K | 3310555.010 / .000 / .020 | Standard / basement / reduced gas struts | Manufacturer family references; exact original strut part required. |
| L | 3312853.025#; 3310777.000; 930065# | Spacer, bumper and cradle options | Dometic requires bumper and cradle on awnings longer than 21 ft; confirm length and finish. |
| M | 3313283.00; 3308334.006U | Safety interlock / torsion crank | Optional service accessory part numbers. |
9200 power awning: product photos
The pictured 8962002.400UL is the 9200 standard black arm set; 925NR16.300UL and 926PI14.300UL are complete fabric/roller assemblies for distinct lengths and series. These do not constitute complete ready-to-install awnings without the applicable arm hardware and controls.
9200 standard power arm hardware — black9200 8962 standard bottom-wire-exit variant; not the 8962012 top-exit model.
G · 925NR16.300UL
9200 16-foot Onyx fabric roller tube assembly925-family FRTA, 16-foot nominal; verify exact fabric/weather shield and LED configuration.
H · 926PI14.300UL
9200 14-foot 926-family Black Onyx fabric rollerDifferent 926-family code and nominal length; do not replace 925NR16 by appearance.
9200 numbered parts and service references
| Key | Dometic MPN | Part or assembly | Selection notes |
|---|---|---|---|
| F | 8962002.400UL | Standard black 9200 power arm hardware | Bottom-wire-exit variant per Dometic hardware model table. Not 8962012 top-exit. |
| G | 925NR16.300UL | 16-ft 9200 Onyx fabric roller tube assembly | 925 series; match original code and LED/weather-shield format. |
| H | 926PI14.300UL | 14-ft 9200 Black Onyx fabric roller assembly | Different 926 series and nominal length; not a universal 925 replacement. |
| I | 3310455.062 | Power awning wall control switch | 9200 installation materials list as an optional control accessory. |
| J | 3312487.006U | Selected standard black power-arm half set | Manufacturer-numbered half set, not complete RH/LH pair; confirm 8962 subtype. |
| N | 8962001.400UL | 9200 basement-height black arm set | Confirm the basement-height 8962001 arm assembly and its wire-exit configuration before selecting a replacement. |
| O | 8962012.400UL / 8962011.400UL | Top-wire-exit standard / basement options | Do not replace with bottom-exit 8962002 or 8962001 without verifying original wiring. |
| P | 3317084.000U; 3317083.000U; 3317085.000U | Black motor, idler and head-cover service kits | Dometic parts catalog references; exact active products not confirmed. |
| Q | 3317080.000#; 3316969.017; 3316969.025 | End-cover kit, optional RGB controller and remote | Dometic installation accessories; finish and control compatibility vary. |
| R | 3312853.025#; 930004 | Back-channel spacer and door-roller kit | Optional installation parts; check exact original configuration. |
Control switch and a selected single-arm repair part
The Dometic 3310455.062 switch is a manufacturer-listed optional control. The black 3312487.006U is a half-set for selected standard power-awning arm designs, not a complete pair and not a universal substitute for basement or reduced-pitch kits. Both exact products are linked to NewRVParts.
Power awning wall-switch kitDometic lists this optional switch for the 9100/9200 families; check original control and wiring.
J · 3312487.006U
Single black standard-arm repair half-setHalf set, not both arms. Only for confirmed compatible 9100/9200 standard-arm versions.
9100 versus 9200 selection and fabric changes
| Model | Parts family | Applicable model | Critical check |
|---|---|---|---|
| 9100 | 8952-series arms | 910 / 915 / 917 family | Standard, basement and reduced-pitch; bottom/top harness routing depends on exact suffix |
| 9200 | 8962-series arms | 925 / 926 family | Newer motor/roller connection; both bottom and top-wire configurations exist depending on 896200x versus 896201x |
| 9100/9200 | 3310455.062 | Switch used across supported systems | Not evidence that a switch, motor, harness or arm from one model universally fits the other |
| 2025 revision | CQ, FJ, NR, NS fabric codes | Fabric revision issued June 2, 2025 | Verify the complete FRTA MPN, fabric suffix and manufacturer change notice before substituting a roller |
Official Dometic diagrams and technical manuals
Use the Dometic manuals above for installation dimensions, routing and repair procedures. Match the complete original arm and FRTA part numbers when selecting components.
Shop collections and related diagrams
RV Awning Parts & Accessories · New RV Patio Awnings · Dometic 8500 Manual-Awning Guide · All Awning, Jack and Slide-Out Parts Diagrams
Manufacturer references: Dometic 9100 Power Patio Awning Installation Manual, form 3312737.054 rev L (July 20, 2023); Dometic 9200 Series Power Awning Installation Manual; Dometic 2025 power-awning product change notice; Dometic 2026 FRTA instructions; Dometic awning model catalogue. Powered awning arms include pressurized gas struts; electrical and structural repairs require qualified service and the manufacturer's safety procedures.