Find replacement components for the Carefree Altitude powered patio awning using factory part numbers, a two-version illustrated reference and real NewRVParts product photographs. The standard Altitude has manually adjusted arm pitch; Altitude PowerPitch uses a different, motorized pitch-adjusting system. These two versions share some service parts but their pitch mechanisms and arm assemblies are not universally interchangeable.
View Available Parts With Photos
Which Altitude version do you have?
Use the numbered overview to identify components, and the Carefree diagrams below for exact mounting dimensions, wiring and assembly instructions.
Altitude factory numbered exploded parts diagrams
Standard Altitude and Altitude PowerPitch use different arm and pitch-adjustment assemblies. The original Carefree drawings are displayed separately so their numbered callouts are not confused.
Standard Altitude — factory parts reference
Factory positions below follow Carefree's updated replacement-parts catalog, with older positions checked against its illustrated 2018 service manual. Use the full part number and awning version when selecting a replacement.
| Factory # | Carefree number | Component | Model selection |
|---|---|---|---|
| 1 | R001934XXX | Original RH motor-side arm | Obsolete; manufacturer directs R001988XXX replacement. Check both-arm retrofit compatibility. |
| 2 | R001935XXX | Original LH idler-side arm | Obsolete; manufacturer directs R001989XXX replacement. Do not install unmatched generations. |
| 3 | R001826R001826 | Gas shock kit | Pressurized support, not the whole arm. |
| 4 | R001927-00X | Standard manual pitch-adjustment assembly | Includes parts 5 and 6 and rivet. Not PowerPitch motorized kit. |
| 5 | R002019-002 | Revised manual pitch-adjustment pins, pair | Compare original pins and arm revision. |
| 6 | R001840R001840 | Manual pitch-adjust arm roller kit | Does not replace PowerPitch kit R002064. |
| 7 | R001929-00X | Arm end cap | Match the required colour. |
| 8 | R001930-00X | Arm hole-plug kit, four pieces | Choose finish to match arm. |
| 9 | R001931-00XR001931-005 · R001931-006 | Motor-head cover kit, front and rear | White -005 or black -006. |
| 10 | R001832R001832 | 12V motor | Separate from item 11 gearbox. |
| 11 | R001833R001833 | Motor-head gearbox | Not a complete motor. |
| 12 | R001932-00XR001932-006 | Idler-head cover kit, front and rear | Suffix -006 identifies black; match the required colour. |
| 13 | R001835-00X | Clip-hole cover-cap kit | Colour specific; identification only. |
| 14a | R001841-xxx | Roller assembly without LED | Length measured between arm centres in inches. |
| 14b | R001842-xxx | Roller assembly with LED | Length and LED system dependent. |
| 15 | R001836R001836 | LH/RH roller retaining-clip kit | One for each head. |
| 16 | R001837 | Drive-motor power harness | Connector and original routing must match. |
| 17 | R001933 | Auxiliary power harness | Manufacturer lists original as no longer available. |
| 18 | 017719-006 | Lower-arm wire covers, pair | Separate from the upper cover. |
| 19 | R041331-006R041331-006 | Upper-arm wire cover | Black, one piece. |
| 20 | R017715-00X | Aftermarket installation hardware pack | Confirm current factory number and colour code. |
| 21 | R019487-003R019487-003 | Wall-switch kit | Includes switch, faceplate, screws and connector. |
| 22 | 19__00 / 19__00RB | Four-slot roller tube, non-LED / white LED | Length-specific replacement; do not select by appearance. |
Altitude PowerPitch — separate factory parts reference
This second table uses the PowerPitch-specific factory callout numbers, which differ from the standard Altitude drawing. Use these references to identify the complete motorized pitch kit and roller kit for the PowerPitch version.
| Factory # | Carefree number | Component | Model selection |
|---|---|---|---|
| 1 | R002050XXX | PowerPitch RH motor-side arm | Different from standard manual-pitch arm. |
| 2 | R002051XXX | PowerPitch LH idler-side arm | Match exact PowerPitch arm and finish. |
| 3 | R001826R001826 | Gas shock kit | Common MPN; match original arm assembly. |
| 4 | R002024-002 | Complete motorized PowerPitch adjustment kit | Motorized pitch mechanism; NOT manual-pitch kit R001927. |
| 5 | R002064 | PowerPitch roller kit with stainless rivets | PowerPitch-specific, not standard R001840. |
| 6 | R001929-00X | Arm end cap | Finish-specific part. |
| 7 | R001930-00X | Hole-plug kit, four pieces | Finish-specific part. |
| 8 | R001931-00XR001931-005 · R001931-006 | Motor-head cover kit | White -005 and black -006 exact catalog matches. |
| 9 | R001832R001832 | 12V roll-out motor | Common drive motor; does not power all pitch mechanisms. |
| 10 | R001833R001833 | Motor-head gearbox | Separate from motor. |
| 11 | R001932-00XR001932-006 | Idler-head cover kit | Black -006 catalog match; confirm colour. |
| 12 | R001835-00X | Clip-hole cover-cap kit | Reference only. |
| 13a | R001841-xxx | Roller assembly without LED | Exact length required. |
| 13b | R001842-xxx | Roller assembly with LED | Exact length and LED arrangement required. |
| 14 | R001836R001836 | LH/RH roller retaining-clip kit | One each side. |
| 15 | R001837 | Motor power harness | Confirm connector. |
| 16 | R001933 | Auxiliary power harness | Check current availability and control wiring. |
| 17 | 017719-006 | Lower wire covers, pair | Separate from upper cover. |
| 18 | R041331-006R041331-006 | Upper-arm wire cover | Black item listed. |
| 19 | R0017715-00X | Aftermarket mounting-hardware pack | The online factory list differs in spelling from older documents; confirm before ordering. |
| 20 | R019487-003R019487-003 | Awning wall-switch kit | Check the full part number before ordering. |
| 21 | 19__00 / 19__00RB | Four-slot roller tube, non-LED / white LED | Tube-length and lighting dependent. |
Optional BT12 wireless and motion-sensor upgrades
Carefree supports optional BT12 electronic controls on compatible Altitude systems. These two kits are separate catalog products, not standard parts included with every Altitude awning. Identify the installed control module and match the upgrade kit to the manufacturer's compatibility and pairing instructions.
901604BT12 kit with motion sensor, no remote
BT12 OPTION · 901605
901605BT12 kit with remote and motion sensor
Kit distinctions: Carefree 901604 is listed with control module, wall switch and motion sensor but without the remote; 901605 adds the remote key fob. Verify the current kit contents and factory pairing requirements before purchase.
Official manufacturer exploded drawings and service manuals
Standard Altitude numbered drawingStandard part-number table2026 PowerPitch illustrated drawing2026 PowerPitch parts table
The original Carefree drawings show detailed service and assembly information. Select a matching part photograph to view its NewRVParts listing.
Shop related collections and additional guides
RV Awning Parts & Accessories · Powered & Manual Patio Awnings · Carefree Compass parts diagram · Carefree Longitude parts diagram · All mechanical parts guides
Sources: Carefree Altitude standard service manual 070026-301; Altitude PowerPitch service manual 070026-303r2 (March 2026); Carefree current standard and PowerPitch parts catalog; and manufacturer Altitude arm-kit descriptions. Electrical and gas-shock service must follow the appropriate original service procedures with power disconnected and supported equipment.
Photographed replacement parts sold in NewRVParts
Each photographed product has a matching manufacturer number in the store. Select a photo to view the listing, then check whether it applies to standard Altitude, PowerPitch or both.
4625APHWWhite Altitude standard-pitch full arm set
STD 3 / PP 3 · R001826
R001826Gas-shock service kit
STD 6 · R001840
R001840Manual pitch-arm roller kit
STD 9 / PP 8 · R001931-005
R001931-005White motor-head cover pair
STD 9 / PP 8 · R001931-006
R001931-006Black motor-head cover pair
STD 10 / PP 9 · R001832
R00183212V awning drive motor
STD 11 / PP 10 · R001833
R001833Motor-head gearbox
STD 12 / PP 11 · R001932-006
R001932-006Black idler-head covers
STD 15 / PP 14 · R001836
R001836LH/RH retaining-clip kit
STD 19 / PP 18 · R041331-006
R041331-006Black upper-arm wire cover
STD 21 / PP 20 · R019487-003
R019487-003Awning wall-switch kit
Complete arm set option: Carefree 4625APHW is a white aftermarket Altitude arm set, not the individual obsolete RH or LH factory arm. The manufacturer's arm catalog identifies it separately with the required mounting hardware and 3.4-inch roller adaptor. Check the installed standard Altitude system, roller diameter and package contents before ordering. Do not assume it replaces PowerPitch-specific arms.
